Search results for query: *

I have a 2008 honda civic si coupe. I was on E this morning so I went to get gas. I told them premium and went inside the store. When I came out the car was filled up. I was told there was a system error and he didn't have my slip. I figured no big deal. Got in the car and reset my trip and...

So my 08 si seems to be making some noise when pressing the clutch down. I have read the issues with the clutch mc. So I ordered my omni clutch mc and stainless clutch hose. I was wondering if anyone has replaced the mc and hose. If so do you have any input or tips. I will try to take pics along...

Im headed down to Charlotte NC in a week. This was a random trip so little to no planning has been done. A group of friends got together and just decided to take a trip and Charlotte is where we pick. We know how we are getting there and where we are staying. The plans are to do a lot of...

I have a 2008 honda civic si coupe. im planning on ordering suspension within the next few weeks. I'm looking at the bc racing coilovers and the form and function type 2 coilover. I haven't really been able to find reviews for my year car. Most people are using the buddyclubs so they can dump...

Not too sure if this is in the right spot. I have an 08 civic si coupe. I have a noise in the front end when turning the wheel at a stop or very low speeds. The noise sounds like the inner tie rods popping. Seems to happen more when its cold out. I have checked the front end every oil change and...

I have an 08 si coupe and looking to lower my car. Im really trying to get some input on what to use for a setup. This is my dd and looking to spend around $1000. A few setups I was looking at were the form n function,skunk 2 and was also think about HFP suspension. My 91 Im using tokico hp with...

I have a 1991 honda civic hatchback that I don't have too much time for so I was thinking of selling it. It has a b16a with cable trans (not sure how many miles) it'd intake manifold shunk2 cat back exhaust, tokico hp struts, new speed coil overs, energy suspension complete bushing kit, avid...

So I am taking the head off my B16 in my 91 Hatch and would like to upgrade the valvetrain when it is off. I have never upgraded the valvetrain on any of my hondas so I am looking for an suggestions for a nice all motor setup(Cams,Springs,Retainers,Cam gears). The car does not get driven...

I got an 02 civic si with an engine light on. code PO172B bank 1 system too rich. I was wondering if anyone has come acrossed this code that could help me out. The O2 sensor is switching and was replaced about 2 months ago. No miss firing. If anyone has any input for me that would be great. Thanks

As it states I just bought a 2008 Honda Civic SI. This is a big change from my 91 civics that i have but it will be a nice change from b series motors. I dont have many plans for the car right now. But later down the road I am sure I will be looking into some mods. Most likely I,H,E but for now...

It seems like its been forever since I was last on hs. Just wanted to say hi and that I didnt forget about everyone on here. Just been crazy busy with work, the damn snow in jersey, my friends wedding and buying my new toy (2008 Honda Civic SI). I hope to me on here more now that I am getting...

I got a 91 hatch with a b-series swap and would like to get it tuned. I live in jersey and dont know anywhere to go. If anyone can give me some info on a place i can take it please pm with the info. Thanks in advance

I am looking for a high flow cat for my 91 civic hatch with a b series swap. 2.25 inlet and 2.5 out. If anyone has anything or knows where I can find one for a good price please pm me. Looking for a direct bolt in if possible. I need asap. Thanks in advance

I have a crank no start, I have spark but when i checked my injectors i have 8-9volts, the battery is 12.16V. I should have battery voltage at the injectors correct? I would also like to know if someone can tell me what pin to the ecu the yellow/black wire is that goes to the resistor box is i...

I hope i am putting this in the right forum. For the past month or so I have had the worst luck with my cars. I have had a release bearing break(replaced clutch)on start up get a CEL 9,then replace dizzy,crank no start, replace cpu still have the same concern. So I wasnt too worried about...

I have a b16 converted to obd 1. The car does not start but it cranks over. I checked spark and it was good. I checked to see if i had fuel pressure and i do 26psi. I checked power and ground for the injectors. I have power but i have no ground. The ground for the injectors is through the ecu if...

I have a CEL with a code 9. I would like to know if anyone has a wiring diagram or knows what wires i need to check for the sensor. I put a clutch and flywheel in and when i started the car up the engine light came on. No light before the swap. I didnt wire the car and not to familar with obd 1...

I have a 91 hatch with b16 J1 cable trans. I just completed the swap and took it for a test drive. The car has all gears but when im in any gear the shifter has excessive side to side movement. When im in 2nd the shifter can be moved to look like it is in reverse. Im using avid shift linkage...

I have a 91 hatch with a b16A the car was converted to obd 1. I just finished putting a clutch and flywheel in. I start the car and the check engine light is on. I jump the 2 pin connector on the passenger side underdash to pull the codes and i get nothing. The light comes on when you first turn...

The right front lower control arm bolt that holds the arm to the sub-frame. The bolt will spin but the metal insert for the bushing is stuck on the bolt.When you try to take it out it just pulls apart the opening were the control arm goes into. I was going to cut the bolt on both ends and cut...