Search results for query: *

I'm just wondering if you guys run nos, and have you ever got pulled over by th 5-0's with it?

Well I'm running a 89 si with 90 zc and I was just wondering could I just put the zc on nos? I have about a 1000 bucks canadian, so turbo is out of the question. Also nos is elligal so I wouldn't be running a wot switch. I don't really want to pound the motor. I just want to see if the zc bottom...

Well I put a 90 DOHC ZC into a 89 hatch and it just wont start I have the wiring all done right. The car is turning over there's just no spark. Some help would be greatly appreceiated. Matt

I just put an 90 zc in my 89 hatchback and it just won't start it turns over and there fuel, but no spark I was trying to use the 89 distrubutor then I tried a 90 and that still didn't work. I'm pretty sure i have the wiring right, but I'm not sure. I just lined up all the colours and connected...

Ya I'm looking at buying a new motor, and the import guy down the street has a 1988 JDM DOHC ZC now I'm just wonder if there's any difference between the 88 to the 89-91 thanx for your help guys.

Just one question, I want to know how do I tell the difference between obd0 and obd1 on the 88-91 dohc zc. thank for the help

Well I have a 89 DOHC ZC, I'm looking to add a turbo in the future and I was just wonder what would be the best flywheel and clutch combo. I'm running the Si tranny,Thanks for the help Matt,

Well my question is I have found a 90 JDM ZC and I was woundering would it go into my 89 Si Hatch with out any problems. Thanx for the help

I have a 87 Zc in 89 Hatch Si I have the Si Tanny,Flywheel and clutch.The Car just doesn't want to turn over the starter just clicks. and my Gauges turn off and the car goes dead.I don't think it's the battery because I have had it charged and then I tried to boost it and that didn't work. What...

I have a 89 hatch with a 87 Dohc zc grey top, I'm running the Si tranny. But when I went to start it up. The starter just makes a wining noise. I know the gear is just spining the starter was working before we did the swap. Is there anythign I could do?. Thanx for the help

Well I have the 87 ZC in my 89 hatch, I went to start it and the starter just spins. What starter do I have to use to get it to hit the flywheel?

Well I have a 89 Si with a 87 ZC in it, The harness hooked up fine. Do you see any problem with me starting it. I heard there is much more wiring involed The only wires I have left is TBC and cam angle sensor. So should I start it? Or will I wreck something. Thanx for the help Matt

I have a 89 Si with a 92 Dohc ZC, When I bout it the motor distributor was broke there's like nothing left of it. I was just wondering could I just use any other distributor cap and rotor then th e stock one? Thanx for the help.

I have a 89 Si with a 92 Dohc ZC, When I bout it the motor distributor was broke there's like nothing left of it. I was just wondering could I just use any other distributor cap and rotor then th e stock one? Thanx for the help.

Well. I just bought Motegi mr7 and was thinking of running Goodyear eagle GTH-R 205/55/R16 Is this a good idea or bad (Go with different tires) I'm getting them for 75 buck Canadian. Thanx for the help

I have 89 h/b with a 92 DOHC ZC as for wiring goes will it all be plug and go. I haven't really had any problems with the swap except for the driver side mount. I think my ZC is OBD0. I have allmost everything pluged in except the TDC and Cam angle. Do you see any problems in the nere future...

Ya, I have a 92 DOHC ZC in my 89 civic Si . There's a plug that's right under the front passenger side cam I used the stock Si wiring harness is that right? Or do I have to change it to the DOHC ZC wiring. Or can i just bypass the cam plug all together. The colour of wires on the ZC plug are...

I have everything done but the motor in. I need to know what motor mount do I use for the Drivers side. Thanx for all the help.

I'm trying to put a Zc into a 89 Si but the Tran won't line up with the Zc. Thanx for the help.

I have a 89 civic Si, And I just bout the Zc but the Zc mounting is on the side,Allmost nere the headers. How do I get it to mount up? And there are also 4 hoses coming out of the distributer what is that and what do I do about it?Thanx