Hey I am parting out a fully built lsvtec i put most of it on ebay Click here for my listings! Ive also got an ITR intake manifold, a spoon throttle body, aem fuel presure regulator, 99-00 front end and a couple other parts that I havent had time to list yet. check out my listings and shoot me...
anyone know anything about crower stage 3's? i just got a new set of crower stage 3's and the crower valve springs and retainers from a freind and was wondering what all else needed to be done to run these well. I have a B16a2 with I/H/E, what other upgrades would be recomended to run these...
I have an obd1 JDM b16a head with ITR cams for sale. comes complte wth manifold, injectors etc. it has about 35K on it and was pulled off of a very healthy B16 swap. after i pulled it i drilled and tapped it for lsvtec but never got around to using it. my loss your gain. $500 w/o cams $650...
I have a B16a hydro tranny had 35K on it shifts great no grinds. $700 Obo
I have a b16a complete head with ITR cams, maniold, fuel rail, injectors ect $700 obo
B16a intermediate shaft $70 obo
Axels 94+ gsr 99-00 si w/o ABS pass side is new and drivers side is 1 month old $100 obo
B series...
i have an HX engine with no dist. honda says the HX is a hitachi dist. and the EX is a westec or something. but they are both 1.6 sohc vtec's will the EX dist work on an HX?
have some 17" gunmetal team dynamics wheels and kuhmo ecsta supra 712's (205-40-17) rims/tires have about 6K on them. they have centercaps as well but they are not in the picture.
you can
see more pics here
I am looking for about $650 or trade for SI's with tires and some cash.
I also...
up for sale is a 97 civic ex. It has a 99-00 front end, 99-00 rear bumper, 99-00 red/clear tail lights and maxspeed coilovers. The car has a rebuilt title because it had a full body kit that was molded on and the kit was damaged by a tow truck and so the body shop thought it would be to...
I have a complete b16a JDM SIR2 swap that has an obd2 dist, alt, and ckp sensor so it can be ran obd2 or obd1. great condition $1700 obo
1999 CRV b20z2 longblock great condition. comes with vtec oil line kit and brand new headgasket for crvtec build. only 35K so you can go stock bore pistons...
how do you all feel about block gaurds? i am building a crvtec for boost and i was told as long as it was tuned properly sleeves wernt necessary but a block gaurd might be a good idea. is this true? what would be the best block gaurd for a crv? where would be the best place to buy one? i know...
what brands/parts do you guys recomend for a good reliable build up? I took out a loan for 8K to build the motor and boost it.
Right now i have-
B20z2 block with si head and GSR tranny
Portflow dual valve springs
aem cam gears
clutch masters flywheel
clutch masters stage 1 clutch
RC310 CC...
I have
JDM b16a swap that is obd2 96-98 with about 45K miles on it. runs perfect $2500
USDM 99 CRV b20z2 longblock with 34K runs perfect $900
both are in great condition and have receipts for both. located in spokane washington willing ship. email stealthycivicsi@aol.com should be ready...
I have a Bseries front tranny mount that is a must for b series swaps. best offer
P2P civic EX 96-98 ecu $40
i have three 4 wire o2 sensors $25 each
b16 throttle body obd1 tps is damaged but functional $35
B16 obd2 throttle body TPS and MAP incl perfect cond. $50
2 sets of OEM B16 dist cap...
I have full interior from a 97 civic ex coupe every panel, head liner, sunroof, door pannels, center console everything i have the entire interior minus the dash and seats let me know what you are looking for color is dark gray.
Thanks
stealthycivicsi@aol.com
Hey i shorted out my dome light on accident and i think its just a fuse but i am not sure what fuse it runs off of as it is not labled at the box. does anyone know what fuse the dome light is running on in a 97 civic EX?
I swapped a crvtec in my freinds 2000 si and for some reason cylinder 3 is missfireing. we changed the plugs, wires, cap, rotor, and the coil in the dist and Honda put on a new timing belt and they said it was "dropping a cylinder" and they didnt know why. they sugested a valve adjustment or...
I have a 97 ex and the CKP sensor on the crank is 3 wire plug on the ex engine harnes and on the ex motor but on the 00 si motor it is a 2 wire sensor. Does anyone know the best way to rewire this so i can hook this damn thing up?
I swapped a USDM 2000 SI engine in my 97 EX had it all wired and worked fine for about a week then all at once the knock sensor started throwing a code, vtec stopped engaging and my spedo died. If i step on the gass the needle goes up but if i let off the gas it drops to zero. It used to work...
i swaped a 2000 b16a2 in a 97 ex. The car had a crvtec in it before so the wiring harness had already been modified for a b series so i just swapped the 97 ex harness on the b16 and plugged it into a Obd2a p30 ecu the wiring harness and the ecu worked fine with the crvtec and the si motor worked...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.