What do you mean by mod my obd2 harness? I currently have the obd2 harness on the engine and the car is obd1. The two harnesses plug together so do you think if I just get a 2 to 1 jumper and run an obd2 computer that will work fine.
I have a 98 integra ls motor that I have swapped into my 92 honda civic. I am going to convert the engine over to obd 1 from obd2 before I run it. I was just wondering what parts I need to replace or change. The distributor, the injectors, the engine harness and what other parts do I need to change.
I have a 98 integra ls motor that I am swapped into my 92 honda civic. I am going to convert the engine over to obd 1 from obd2 before I run it. I was just wondering what parts I need to replace or change. The distributor, the injectors, the harness and what other parts do I need to change.
I just finishied swapping a 1998 b18b into my 1992 civic and I have two vacuum lines that arent going anywhere that are coming off the charcoal canister. I dont have and place on the tb to place these lines. What should I do. I have one line that is a larger hose coming off the charcoal canister...
Its that easy huh. Man I have been searching for weeks now. Thanks a lot. That must be why there arent many resources for this exact swap, because there is nothing to it. Thanks
I am doing an obd2 b18b1 engine swap in my 1992 civic and I was wondering what wires need to be added or swapped. I am running an obd1 pr4 ecu also. I see that the ecu doesnt have a knock sensor and neither does he engine so that eliminates that wire. Do i need to run the wires for the evap...
I am dropping my obd2 b18b in my 1992 civic hatchback right now. on the obd2 engine harness there are 2 different places for 02 sensors. On the front and the rear of the motor. I am running a 2 peice dc 421 header. It only has the insert for the 02 sensor bhind the motor. What should i do...
I am trying to finish my swap and I need some parts. I prefer to only pay with paypal. Email me at nwisehart@yahoo.com if you might have something.
Heres what I need.
94-01 Integra axles
Obd1 LS Ecu
94-01 Integra Throttle Cable
I have this B18a lonblock for sale on ebay. The buy it now is $500 and the reserve is $400 make me an offer. I need to sell this so I can finish my swap. Email me and we can negotiate.
http://cgi.ebay.com/ebaymotors/ws/eBayISAP...2403529814&rd=1
If I am running a cable tranny with a b16a1 in my eg with a 90-93 integra intermediate shaft what axles should I use. The 90-93 teg axles or the 94-01 teg axles. Thanks
Whats up everybody. Here is what I have. 1992 Civic Hatchback and I am swapping a 1st Gen B16a with an S1 Cable Tranny into it. What my question is, is what do I do about motor mounts into my EG? I know I can go ahead and fork out $450 for some Hasport mounts but I am trying to do this as...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.