Search results for query: *

Well anyway, I got rid of my 98 Dx hatchback before I went to basic training, and when I got home I bought a S2000. So far it has just showed me that I suck at driving, but I am getting better. Can't drive it now in the winter, so I am sure I will have to learn come spring again. Here is a...

Ok, I am cleaning out my garage and have ALOT of stuff to get rid of. B20 CRV Block -$600 -comes with the block, crank, most of the gaskets, head gasket, vtec conversion oil line, misc brackets, oil pan, other stuff I am forgetting -I don't know what happened to the oil pump for...

Can anyone tell me what the wire colors are on the distributor side of the plug for a d16z6 engine, and what they go to? I am trying to do an OBD-1 conversion in my brother's CRX, and the wires are cut on the distributor, but they are not the same as the wiring diagram. :cliffs: What wire...

Washed my car, and decided to take some pics. I took my sideskirts off so I could wash underneath them. Nice and quiet. Next, I think I would like to do a 00 front end conversion, just need the front bumper, have everything else.

Hey everyone, this Saturday there is an autocross event in my city. I have never done this sort of thing before, so can any autocross veterans out there give me some pointers? I think it is being put on by SCCA, so I will have to follow their rules. Setup: 98 dx hatch d16y8 & 00 EX trans...

Ok, I have a 98 dx hatch with a 00 d16y8 in it. I have a 98 ex auto engine wiring harness, converted to work with the manual tranny setup I have, with a conversion harness to run a p28 ecu. I have no check engine lights, and the car runs fine, but the speedo doesn't work. Actually the check...

I have a 98 dx hatch with a 00 ex swap in it. My question is this, my front mounts on the tranny and the ac bracket, are very loose in the actual mounts. Is there a difference between the b series and d series mounts, not brackets? Anyone else have this problem?

I am looking at buying a Si or Ex cluster for my 98 hatch. I have 51K miles on the car, but the cluster I am looking at has less. Can I buy a cluster with fewer miles on it than my car, and turn the odometer up to read the correct mileage? Or, can I turn the mileage back, so that it reads the...

I am looking for a 96-00 Civic instrument cluster, preferably between 50-60K miles on the odometer. I have a Civic type r cluster with ~20K km on it that I am willing to work out a trade with also. I would like to get an EX or Si cluster but let me know what you have! Thanks.

I am looking for both the left and right side fenders, and also a front bumper. Would prefer to have the parts in silver, but let me know what you have and we'll talk. Must be willing to ship parts to ND. ALSO: I have the fenders and hood from a 98 hatch for sale, in silver. I will take...

I have a set of four rc 310cc injectors that have been used for 500 miles. They are SATURATED not peak and hold. Asking 315 shipped to the lower 48 states. PM or reply if you have any questions. Thanks.

I calculated my injector sizing at rc's web page and this is what I got: http://www.rceng.com/technical.htm#WORKSHEET est crank hp = 230 number of inj = 4 BSFC = .5 duty cycle = .75 fuel pressure = 40 Using the formula it says I should use 420cc injectors. Now I am confused, as I checked...

A friend of mine works at the Chrysler dealer in town and he said that they have around 15 new Dodge trucks with the new Hemi engines in them sitting in their shop, all around 8000 miles on the ODO. I guess they are spinning rods or something due to lack of oil pressure :o . Has anyone else...

I did some searching, but I couldn't find anything about this question: I have a b20 with 11.8:1 compression. Will I need to use stainless steel valves or should I just use ITR valves? If I should get stainless, should I use skunk2 or ferrea? I would like to run N2O on this engine. Thanks...

Hey everybody, I am cleaning out my storage unit and I found some stuff I want to get rid of. Send me a PM if you are interested. 92-95 stock radiator, no fan - $make offer Eagle h-beam rods for ls/b20, 1000 miles old - $offer 2nd gen jdm b16 cams, springs, and retainers - $offer 2nd gen...

Has anyone seen on the news about the ND girl who was kiddnapped at the mall? Her name is Dru. I live 2 miles from that mall, it is pretty messed up that it is this close. Nothing like this has happened before in town

I rebuilt my b16 head in school (I am going for mechanic). I put new Skunk2 springs/retainers, and ground my valves and seats. When I measured the valve installed height, the height was too much due to the seat and valve grinding, so my instructor told me to use a machine that grinds off the...

Hi, this is my first time building a turbo car for myself, and I would like to know what I need to do/purchase to do this correctly. My setup is this: 98 civic hatch b20 block soon to be sleeved b16head with CTR cams, skunk2 springs/retainers skunk2 intake manifold drag 3 turbo kit gsr tranny...

I was watching tv today and the ticker at the bottom of the screen said that the Star Wars kid's parents are going to sue people over the use of the video. Anyone else hear anything about this?

Sorry if this has been posted already, but check this out. A Superbeetle with a jdm b16a in it. http://cgi.ebay.com/ebaymotors/ws/eBayISAP...item=2424338242