K2e2vin
Senior Member
I have NIB a pair of CDT M6 mid-bass speakers. They're still factory sealed as shown in the picture. I'm only selling them because I want something that can play highs a little better; will trade for high-sq 5.25" or other 6.5" mid-range speakers(I actually want something like the CDT ES-6/ES-600, Dynaudio Esotec or Esotars, Eminence Alpha-6C, etc.) or mid-bass speakers that can play really low(CDT M6+/ES-06+, etc.)...will consider comps and a 4g 16gb Ipod Nano too! Just let me know what you got.
I'm located in Raleigh, NC. These go on ebay for about $300 so I'm letting them go for $270shipped obo. No personal checks; paypal, certified bank check, and money orders only! Contact me via PM.
Specs:
# Mounting Depth: 2.94"
# Diameter: 6.5" (170mm)
# Sensitivity: 88.1dB
# Power Handling: 150w RMS (300w Peak)
# Prequency Response: 10-4000Hz
# Nominal Impedance: 4 Ohms
# Voice Coil Diameter: 1.37" (35mm)
# Peak Xmax: 10mm
# Magnet Weight: 30oz
# Free Air Resonance: 52Hz
# Voice Coil DC Resistance: 3.8 Ohms
# Mechanical Q (QMS): 2.46
# Electrical Q (QES): 0.516
# Total Q (QTS): 0.426
# Compliance Volume (VAS): 15.05; 0.53 ft3
# Moving Mass, Diaphragm: 20.0Gr
# Motor Force Factor: 5.68 Tm
I'm located in Raleigh, NC. These go on ebay for about $300 so I'm letting them go for $270shipped obo. No personal checks; paypal, certified bank check, and money orders only! Contact me via PM.
Specs:
# Mounting Depth: 2.94"
# Diameter: 6.5" (170mm)
# Sensitivity: 88.1dB
# Power Handling: 150w RMS (300w Peak)
# Prequency Response: 10-4000Hz
# Nominal Impedance: 4 Ohms
# Voice Coil Diameter: 1.37" (35mm)
# Peak Xmax: 10mm
# Magnet Weight: 30oz
# Free Air Resonance: 52Hz
# Voice Coil DC Resistance: 3.8 Ohms
# Mechanical Q (QMS): 2.46
# Electrical Q (QES): 0.516
# Total Q (QTS): 0.426
# Compliance Volume (VAS): 15.05; 0.53 ft3
# Moving Mass, Diaphragm: 20.0Gr
# Motor Force Factor: 5.68 Tm
