IAT Sensor

[Maximum]

Where is my IAT Sensor? I drive a '95 Honda Prelude SI H23A.


Thanks!

- Maximum

 

[pills_PMD]

i'd guess in the intake runner for cylinder #2.. thats where it is on my b series

 

[dohcvtec_accord]

Nope. H-series are different. If you're standing in front of your engine looking into the engine bay, it's on the driver's side of the intake manifold, near the back and bottom. It's a white sensor, and has a 2-wire plug.

However, it's very hard to get at the screws that hold it on. If they're at all seized, most likely you'll have to take off the manifold to get it off. It's what I had to do.

 

[D See 2]

yea, those screws are really hard to get off, stupid honda engineers, why didnt they just use 10mm or 8mm bolts...

 

[dohcvtec_accord]

Originally posted by DTEC@Jul 10 2003, 08:27 AM
yea, those screws are really hard to get off, stupid honda engineers, why didnt they just use 10mm or 8mm bolts...

I was so pissed that I had to remove my manifold. If I had known, I woulda gotten a Hondata gasket. Bolts woulda been so much easier...