Need More Displacement

[JDMSpecAccordSir-T]

I have a F20B in my car with a bore and stroke of 85mm×88mm which equals 1997 cc. how could i increase displacement without boring out the cylinders. I have a idea about the H22A crank and rods in my F20B (assuming they have the same exact blockheight) to get more diplacement. How would i calculate this to get cubic centimeters?
Any help from Geniuses/Mad Scientists would be appreciated.

 

[JDMSpecAccordSir-T]

VTEC GOD if you can hear me please send someone to help me or atleast answer my question

 

[mattcalica]

putting a h22 crank is probably somehow possible, but it would probably cost a lot more than just boring out the motor...any reason as to why you dont want to bore the motor? I dont really know too much about the f20's, but i'm sure there are some overbored pistons that you could find...

 

[JDMSpecAccordSir-T]

There arent many reputable machinists down here that wont charge me a arm and leg to do that replace the crank is more swapping which should be quicker and less hurtful on the wallet but what i would like to know is what kind of displacement i could expect from swapping out a h22a crank and rods into my engine which has a bore and stroke of 85mm×88mm.