Rc 310cc Obd2 Injectors On A Obd 1 Gsr

[alloveryou]

I've got a 95 GSR B18C1 in a 92 EG6. I got a set of 310 RC's from a 96. Will they work? Anything I can do to make em work? Any help would be appreciated.

 

[AllMotorMonster]

Originally posted by alloveryou@May 12 2003, 06:20 PM
I've got a 95 GSR B18C1 in a 92 EG6. I got a set of 310 RC's from a 96. Will they work? Anything I can do to make em work? Any help would be appreciated.

RC doesn't make OBD2 injectors. If they were on a OBD2 car, then someone cut the stock injector plugs and installed OBD1 ends on them.

They are plug and play for your OBD1 engine.

 

[posol]

injectors are NOT obd. its the wiring that is OBD. obd2 use these special $10 clips. obd1 don't.

 

[AllMotorMonster]

Originally posted by pissedoffsol@May 13 2003, 02:19 AM
injectors are NOT obd. its the wiring that is OBD. obd2 use these special $10 clips. obd1 don't.

Sorry, I have to disagree with you on this one.

Call RC Engineering and ask them about this.

The injectors they use have OBD1 style connections. IF you happen to have a OBD2 vehicle, you will need to cut off your OBD2 injector clips, and solder on the OBD1 style clips.

If your engine is OBD1, then the RC injectors are a direct plug and play.

Talk to Russ if you don't believe me.

www.rceng.com

310-320-2277

 

[posol]

you pretty much agreed with me though dude. lol

the actual injector itself is NOT any obd. its peak/hold or saturated. not obd1 or obd2
and like i said, obd2 require clips- just as you said.

 

[sleepinonacreeper]

Yes those injectors will work with no mods to your wiring.