Recent content by bangandow

...guess I don't... just seems like the logical conclusion.

Sensor's shot :( and it is fucking miserable outside!

Nope... worst case scenario is I talk to him Friday. Thanks for the diagram.

Short answer: no :( Been a hectic weekend and now that I have the time to mess with it, H-T isn't responding...

It's running fine now... I swapped everything peripheral to the engine (distributor, intake, etc...) back to the OBD1 parts and plugged the OBD1 ECU back in and everything went much smoother. Boostedf22 was kind enough to come over and point out that I had two plugs mixed up, and voila! She runs...

Based on the advice of a local shop, I swapped back in the OBD1 intake manifold and a few other things and hooked the OBD1 ECU back up and she's running much smoother... new problem now, though: when I start it up, it climbs right to 3000 RPM's and creeps up a little bit past there... Any...

Southside... just inside Chesterfield off of Midlothian Turnpike... Worked some more on it today... got the timing right, but it's still running kinda rough... didn't risk a trip to get the CEL checked out, but I know I need to... the D4 light is still blinking... when I give it some good gas...

Just finished swapping an auto OBD2 F22 into my '95 accord... Swapped in the OBD2 ECU using an adapter, but kept the OBD1 alternator because it matched up with the engine harness. Fired it up and it's running rough... the engine's shaking all over the place and it's making this sputtering kind...

Thanks for the reply... So am I right in my understanding that I keep the '95 engine harness and swap in both the OBD2 engine and OBD2 ECU? ...and the adapter is for plugging the OBD1 engine harness into the OBD2 ECU? If so, is the link I gave the right adapter? Boomslang Fabrication OBD1 to...

OK, two weeks until I strip down my car and I'm trying to make sure I have all the supplies I need... I found reasonably priced conversion harnesses at Boomslang Fabrication OBD1 to OBD2 Conversion Harness :: NIPPON POWER but I called them up to verify this was the part I'm looking for and they...

Will either of those harnesses I posted work, or are they converting in the wrong direction for my application? Is anyone aware of an obd1>obd2a conversion harness that can be had for a reasonable price? How hard would it be to make one? I've looked around for a wiring diagram and can't find...

So nobody has any advice to offer? I know someone here can shed some light on this for me... As far as harnesses go, would either of these fit the bill? eBay Motors: OBD2-OBD1 ECU JUMPER HARNESS"HONDA" (item 280096095112 end time Mar-27-07 00:57:05 PDT) eBay Motors: OBD2 to OBD1 conversion...

I was really reluctant to start a new thread with my first post, but I searched and searched to no avail :( so here goes... I have a 95 accord wagon with the F22 VTEC engine and automatic transmission. I just acquired a parts car (accord) that is also an F22 VTEC and an automatic transmission...