just found that you neen to machine the valve pockets and narrow the rods to put ls pistons in a b16a
ok my rods are allready done due that i have r pistons i my engine but the valve pockets!!!!!
no too much hassle
now found on ebay nippon racimg low compression pistons for b16
talked with...
these pistons will make some thing like 8.5 - 9.0 :1 in the b16a1
looking somwhere around 275 to 300 horses depending on tuning!
using garrett t28 turbo on a log manifold, 460cc injectors ...
[/attach][/attach][/attach][/attach][/attach][/attach]
i have currently the pct s in my block but i had the pr3 s as oem
the sizes on these pics are telling that they fit
but note the valve pockets accurately between the pr3 and the pr4
when you make an ls vtec u dont have to change...
i was wondering to to buy some ls pistons for a b16 to lower the cr for turbo setup
but the guy that i was dealing with told that they wont fit the b16 ???
WHY???
b18a or b18b have the best pistons for a low budget turbo setup and i dont wanna get too much boost 8 to 10 maybe 12 psi dont...
found that part it is made by speedfactory and the precice name is
shift change holder assembly
and sadly is off my budget scale
now i m gonna take the box apaart and try to make a similar modification to mine due to speedfactory only upgrade the stock unit by making it more robust and...
i have a ys1 cable trans that is starting to pop off gears or is not engaging properly into gears
i know that bthese gear boxes tend to bend the selector assembly
iknow that a certain manufacturer makes the components better than oem but i just cant find nothing about it
can any one send me...
i have a new problem this time is the tranny!
i have a ys1 cable tranny and the fourth gear that is jumping off or not even engage at all any ideas about it??
once i was searching and i found a thread about a small selector in the gearbox that tend to bend with extreme use and there is...
need to choose between full 4-1 and the new tri-y style header for a b16 with 12.0:1 cr
which way i have to go ????????????????????????????????????????????:confused:
i just put my hands on a set of sir rear suspension complete with disc brakes an d im gonna swap it on my dx but i have the handbrake cables missing
now the question is will the stock cables fit on the disk setup or i will have to get some different cables for those?
stock =drums:p
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.