Recent content by jac_smk

Ok..i did the ohm test a minute ago and everything is good, so i dont know what is going on with this pos.

ok ill do that when i get off work tomorrow and hopefully it will tell me something,thanks

yeah that has already been done. i swapped the two wires around on the tps. this is what we did, my friend has a 91 civic hatch, i did the dpfi to mpfi swap to his car about 3 years ago, has been running fine with no problems. so i left his harness on the motor when we took it out and just...

Im pretty sure the tps is good, it was good 2 days before i put it in my car cause it was running fine in my friends car. i think the eacv is pretty much the same thing as an idle air control valve. How would i check the tps to see if its good tho?

I have a 89 crx dx, swapped my old motor with a friend that had a sohc zc and used his harness and just did the work at the ecu with the de-pinning and moving the wires around, im 100% sure the wires inside are right. The tps wires have been swapped like is called for, but it ran fine in his car...

i am located in alabama, if u give me ur email i can send u some pics of it,

i have a 91 crx si shell ill sell you, full mugen body kit, lowering springs,projector headlights and altezza tail lights, $800

i have a 91 crx si with a d16z6 swap, body kit, projector light, tail lights, p28 ecu with turbo chip, wired for hondata or equal, short shifter, header, high flow cat, 2 1/4 exhaust all the way back, extra trans and z6 block, and alternator. 14" steelies, u can keep the rims to compinsate...

i have a 91 crx si with a d16z6 swapped into it, ill trade ya for it, i have pics of it, if ur interested lemme know, jacobtaylor586@hotmail.com

I have a 91 crx si, converted to obd1 due to d16z6 swap. Full mugen urethane body kit, z3 fenders, 14" black steelies withgood tires. aftermarket springs of some sort. projector headlights, altezza taillights. Header, hi flow cat, and 2 1/4" exhaust all the way back to the muffler. short...

i have a 91 crx si with a z6 motor in it, full exhaust and shit, its quick, lemme know

I have a 91 crx si, converted to obd1 due to d16z6 swap. Full mugen urethane body kit, z3 fenders, 14" black steelies withgood tires. aftermarket springs of some sort. projector headlights, altezza taillights. Header, hi flow cat, and 2 1/4" exhaust all the way back to the muffler. short...

i have a 91 crx si, i swapped the engine to a 93 si z6 motor,and the only trans i could get for it at the yard was one out of a 88 hf, dont recommend at all, worst gearing ever, great on gas tho. i am getting a 87 si trans for free and wanted to make sure my axles will still work, i heard the...

i just swapped a z6 into my 91 crx and its running but has bad throttle response, what can i do to fix this? i adjusted the timing by the dizzy but no change in throttle response, whats the deal, anyone have any suggestions.

i bought a 91 crx si and it didnt have a engine harness, i cant find any junkyards local that have any, tried a hf but totally not right. anyone have one they are wanting to sell? swaping a z6 engine and need the harness badly,thanks