Recent content by nosaholic

I would like to know whay clutch setup do i need to install a brown top jdm zc with stock man trans 87 crx

Hi I'm building a zc engine and one of the cams were broken. I bought a set of stock cams but the cam gears are larger. Can I use the old cam gears (smaller ones) with those cams or do I have to use the larger one they came with also how do I know if these are real zc cams and not a integra...

Sorry I listed in the wrong area. I was in a hurry and didn't pay attention. Thanks for the move

Hi I'm building a zc engine and one of the cams were broken. I bought a set of stock cams but the cam gears are larger. Can I use the old cam gears (smaller ones) with those cams or do I have to use the larger one they came with also how do I know if these are real zc cams and not a integra...

Hi looking for a set of JDM ZC DOHC cams anyone have a set for sale

How about a engine harness for a 91 crx si

Hi getting ready to install a 95 b18c1 in a 89 crx. I have the mounts already. I would like to know what axle combo to use and what about headers? I looked for a forum already about this swap and couldn't find one. Thankss for any help.

This is suppose to not be able to happen, but I had a friend that put the dist. in 180 out. It was bolted in and had spark and fuel but wouldn't run. It should slide right in. Check that.

Your will also need shifter rod set up.

Hi I'm needing some help. Install a 93 h22a1 in a 93 hatch and the h22a1 has a external coil does anyone know how to wire that up? Also all the forums talk about install the prelude intermediate shaft and using a 90 to 93 teg left drive axle. Mine was about 2 inches or so to long. The ball jiont...

You gotta have right tools for the right job. If you want to cut hole out don't use anything but a plasma cutter. Also you now have meet someone crazy enough to try and use mount everyone says doesn't work. I'll keep you informed as to how it goes. Oh yea can you post pics.

I started installing a h22a1 in a 93 hatch sunday using TOTEM mounts.I'm taking my time as I only want to do it one time on this car. I install a stage three clutch and a FIDANZA flywheel all new seals and belts. Also putting a underdrive pulley. I'm hoping to have this thing fired up mid next...

I want to buy a header 4 to 1 for a 93 h22a1 found some for a 97 is the bolt pattern different . Does anyone know Thanks

I,m getting ready to install a f22b into a 93 accord replacing its f23a. I was told all f blocks have interchangeable parts as far as intake exhaust and transmissions. I need to know if this is true and has anyone tried this before.Also would I need the computer out of the f22b to make it run...

Thanks for the info will order the parts needed.