Search results

  1. A

    Chipped P28's And Stock B18c1 Intake Manifold?

    also, the secondaries is different from vtec right? i feel the vtec kick in at 5700 rpm. this isn't the secondaries activating right?
  2. A

    Chipped P28's And Stock B18c1 Intake Manifold?

    the guy that worked on my car said the p28 does open the secondaries and ading a skunk2 intake manifold to my stock motor won't yield much power. will getting the skunk2 intake manifold yield more power since my p28 an gsr intake manifold don't work that well together?
  3. A

    Chipped P28's And Stock B18c1 Intake Manifold?

    i've heard that by using a chipped p28 in a b18c1, u won't be able to activate the second stage vtec from the b18c1 because the p28 is only for single stage? they said to get the skunk2 manifold so it'll be single stage. other ppl say that the p28 does activate it and sticking with the stock...
  4. A

    Break In Period For Exedy Organic Clutch?

    is there a breakin period for the exedy organic racing clutch? i didn't really break mine in (didnt know) and started racing and stuff. anyways, it smells whenever i race. (is it normal for the exedy clutch to smell like a burnt clutch?) i've been launching a little and shifting hard. if there...
  5. A

    Redline For Skunk2 Chipped P28?

    anyone know where i can safely rev my car to with the skunk2 program in my stock p28 ecu? (i had a d16z6 and now i got a b18c1). what's a good shift point for that program? also, i hear something like running a chipped p28 on a stock b18c1 will make you lose torque because of secondary...
  6. A

    Ticking Noise Coming From Fuel Injectors Area

    are you sure it needs a valve lash adjustment? its not coming from inside the motor. its coming from the fuel injectors/intake manifold area. that is on top of the motor.
  7. A

    Ticking Noise Coming From Fuel Injectors Area

    this is a 98 gsr motor i got swapped into my 93 civic not too long ago. anyways, there's this ticking noise coming from my fuel injectors/intake manifold area. also, whenever i accelerate, the ticking gets louder, especially at 3,000 rpm and up. any ideas on what this could be and how i could...
  8. A

    How Can You Check For A Motors Age And Mileage?

    hey krsvicic, are you sure about the circle with two numbers meaning the year? For my motor it says 9|9. does that mean it's a 99? The guy told me it was a 98 motor and the reciept from the auto junkyard said it was also a 98 motor. Can it be a 99 head or something?
  9. A

    What Intake For B18c1 In Eg Hb?

    what intake do you guys run with the gsr swaps in the 92-95 civic chassis? did you guys use your old sohc intakes and modified it to fit or did you modify the gsr cold air intakes?
  10. A

    1/4 Mile Time For B18c1 In 93 Si Hb?

    any ideas on a stock b18c1 in a 93 si? keep in mind that the si is the heaviest of the bunch. i'm guessing hi 14's to low 15's??
  11. A

    Rattling When Accelerating In B18c1 In Eg

    there's this rattling noise coming from my engine whenever i press on the accelerator. once i let go it goes away. it only rattles when i am on the pedal. it gets even louder when i'm in higher rpms. anyone know what it could be?
  12. A

    Usdm Type R Headers Any Good For The B18c1?

    yep bolts up perfectly. all b-series fit all b-series (as i know now). i also got a usdm itr cat connected to the headers.
  13. A

    How Can You Check For A Motors Age And Mileage?

    i just got a b18c1 swap into my eg. the seller claims its a 98 with about 30k miles. is there a way i can verify that?
  14. A

    Slight Ticking From Intake Manifold

    is this normal?
  15. A

    Usdm Type R Headers Any Good For The B18c1?

    it bolts right up. the usdm type r headers fit the usdm gsr. my car is almost ready.
  16. A

    Usdm Type R Headers Any Good For The B18c1?

    i was getting the usdm type r headers put into my hatch along with a gsr motor. I know that the jdm has good performance gains but is there a difference between the usdm one? Will i be better off using the usdm type r headers of should i just use the stock gsr header? I will also be using the...
  17. Try your Search on Google

Back
Top