Search results

  1. S

    CA 2 Honda Acura, Moroso Valve covers.

    didnt see the little paper clip. thanks
  2. S

    CA 2 Honda Acura, Moroso Valve covers.

    FS 2 Honda Acura, Moroso Valve covers. 1. Honda/Acura Moroso Valve Cover 69011 fits B18C1, B18C5, B17A1, B16A3. its the red one. Comes with mounting Hardware and oil cap, NO gasket. $150.00 + shipping 2. plain one, I am not too sure on what it fits? but what i can find is 90-93 Acura Integra...
  3. S

    97 prelude Automatic trans.

    Hi, what would cause 1-2 not to work rite? as it cant make up it's mind lol, but the other gears work just fine. What year car/automatics will fit this if i need to replace it, so i have a idea what to look for. Thanks
  4. S

    Re-chip ecu form AT to MAN?

    Thank you very much for the info.
  5. S

    Re-chip ecu form AT to MAN?

    That would be great if thats all i whave to do. why i ask is you can pick up usdm p30 ecu A/T for alot less money then the M/T ecu ( there wanting in arm and leg for them now lol ) . Thanks
  6. S

    Re-chip ecu form AT to MAN?

    if i get a automatic Ecu can i have it re-chipped to work with a manual trans? or is that program on the mother board?.. Thanks
  7. S

    DPFI->MPFI help needed, throwing codes 4 and 16

    go here https://hondaswap.com/reference-materials/ecu-pinouts-28667/ Look at the 5th post down named OBD0 DPFI to MPFI Comparison Pinouts It's a side by side view of DPFI to MPFI pin outs
  8. S

    DPFI->MPFI help needed, throwing codes 4 and 16

    you should of only had to add Injector 3 and injector 4. and leave injector #1 and #2 stock wiring.
  9. S

    DPFI->MPFI help needed, throwing codes 4 and 16

    You should have run 2 wires to the injectors #3 A5 ,#4 A7 and then run 2 more wires over to the resistor box for those 2 injectors ( grounds ). Then two more wires for the distibutor C1 and C2. "i cut wires A3 and A7 and ran then to injectors 2 and 4. i used the stock red and yellow wires...
  10. S

    DPFI->MPFI help needed, throwing codes 4 and 16

    and you made sure you distributor is wired the same as the Distributor harness plug? i'll take a look at the link. Tps wired wrong will only make the computer think your at full throttle at idle, not give it any throttle or increase ide speed, but just dump a bunch of raw fuel in the cylinders.
  11. S

    DPFI->MPFI help needed, throwing codes 4 and 16

    " well not really, ECU is still throwing code 4 (crank angle sensor) and when i rev the engine it still only goes to 3200 rpms. wtf. " B10 and B12 are your crank angle sensor C1 and C2 are you Cylinder postition sensor Did you re pin B10 and B12? B10 is empty and you will have to add a...
  12. S

    California Smog Guide

    Parts needed to be smog legal in cali for B16 in a crx, should be the same for civic too.. and you will be using the 94-95 Del sol smog stuff and some 92-95 civic. 94-95 del Sol 1.6L (TD-42U) Distributor 94-95 Del Sol ECU P30 USDM you will need in adapter from obd 0 to obd 1 ( some refs want...
  13. S

    Cali smog parts you will need for your Crx

    Parts needed to be smog legal in cali for B16 in a crx, should be the same for civic too.. and you will be using the 94-95 Del sol smog stuff and some 92-95 civic. 94-95 del Sol 1.6L (TD-44U) Distributor 94-95 Del Sol ECU P30 USDM you will need in adapter from obd 0 to obd 1 ( some refs want...
  14. S

    I Was Like Wtf!!!!!!!!!!!!!!!!!!

    there all the same, but where it says two way valve it goes into the firewall.
  15. S

    B16A got fuel no spark

    How is it going to start when he has NO SPARK...
  16. S

    Clutch popping noise?? Help Please

    does it do this when you turn sharp, left or right? could be a bad axle making the popping sound you hear..
  17. S

    Why Is This Do I Just Tap In?

    see i f there is a hole in the side of the purge control valve where the nipple broke off.
  18. S

    90 crx/B16/Obd 1

    90 crx B16 obd 1 ecu is stock P30 Question i have a Air fuel guage in it ( I know it's not a true read on AF) but it's what the ecu is doing. My guage at a steady throttle will always swing from lean to rich? why does it do this? shouldnt it hold some what steady? if so what would cause the...
  19. S

    B16A got fuel no spark

    EX?? i would double check the pin outs i posted, as thats how it should be wired for a Obd 0 b16 HF/SI crx
  20. Try your Search on Google

Back
Top