Search results for query: *

I dropped a zc dohc into my 90 rex and have terrible wiring problems. Its a dx and the wiring off the ecu looks like a birds nest. Does anyone have a wiring diagram for a pm6 as to what wires go where, or have a wiring harness to sell me? Any help would be appreciated. It constantly is poppin a...

I am in need of an engine bay wire harness for my 90 rex w/dohc zc OBDO! Please let me know if you have one or where i can find one! the last swap was done by a friend, and he hacked it up badly, so i need one that is in good condition! you can email me at gumbalia420@yahoo.com or call at (727)...

Sorry to keep botherin you, but it ran fine yesterday and then this mornin I went to breakfast and it started throwin a 3 code again. All the vacuum lines are hooked up correct and are brand new hose. I don't understand it?? Think its just a bad MAP? The car has been sittin dead for 4 years, 3...

Thanks again! you are a lot of help!

ok, i ran the hoses according to your map and it seems to idle correctly and didnt throw a code when i just took it around the block! Thanks so very much!

ok, im not sure why, but my vacuum lines are not ran ANYTHING like your diagram! let me fix these and ill let you know how it runs then! that could be my problem huh?! and would you buy a pg7 off of ebay or find one somewhere else?

today, its now poppin the code 13 again. this is the atmospheric pressure sensor. is this the same sensor as the MAP? i want to know this before i buy the MAP sensor and a new computer! also could it be the vacuum hoses ran the wrong way? Thanks for all the help!

Ok. Thanks. I had them mixed up I guess?! Also it idles around like 750 rpm and does this fluxuatin about 100 - 200 rpm, and I have to pull up on the gas pedal when its warm cause it wants to idle around 2000 - 2800 rpms. I cleaned the cable well with brake parts cleaner and a shot of wd40 and...

But doesn't the pg7 cut off at 112. I have the dx tranny and it does 118 in 3rd so I want the pm7 correct? thanks for the help!

But doesn't the pg7 cut off at 112. I have the dx tranny and it does 118 in 3rd so I want the pm7 correct? thanks for the help!

I finally got my zc dropped in my 90 rex! Had no problems thanks to jlicrx! Thank you much! It runs fine all day until I get down on it and right as I shift into 2nd, it pops a code 3. I can reset it and have no problems till I'm runnin it again. Can anybody help me. Do I just need a new map...

dohc vtec Hey thanks alot! you have been a big help!

dohc vtec ok, it is going into a dx but, i did a swapbefore to a sohc zc d16a? so will it already be wired for that, i know we added two more wires to the dizzy? from a five wire to a seven wire! will i still need to add more wires or is it going to work? Thanks for all your help! hows...

dohc vtec so if there are no dohc vtec's then what are the two wires hanging off the motor for? i believe it is coming out of a box that says vtec? and its a zc 2043517! Thanks again!

i got a zc dohc 1.6 and am putting it in my 90 rex, i beleive it is a vtec, but how do i read the stamp on the engine to know exactly what i have? can anyone help me with this issue! Thank you for any info!