Search results for query: *

if the timing was 180 degrees out would that cause a car not to spark since tdc and other sensors are in the distributor?

So I replaced the main cabin harness along with the engine harness. I got it to spark one good time and thats it. Anyone know if the ignition switches from 92-2000 are all the same? I had to replace my ignition switch and i got one from a 2000 civic si.

I am looking for a main (cabin) wiring harness fo a 92-95 civic.

Ya i checked it! I am getting power to the ecu, power to the coil( im shocked my self yesterday lol). this whole thing makes no sense. When i pulled the dash out, I noticed that some of the coating on the wires (ignition, a couple injector wires) comming from the wireharness that plugs into the...

I bought a new distribuor so I am sure its not the problem. I have a noid light, thats how i found out they were not pulsing. I am going to rip out the engine and cabin harness and start over.

how do you edit posts on here? lol I checked the thermostat ground with a ohm meter and its good. I also checked the ground that goes into ecu and it has a good ground. I checked the ignition power wire comming from the ecu and its getting 14v. This is weird as hell!

I the checked the thermostat ground a ohm meter and its good. I alsp checked the ground that goes into ecu and it has a good ground. I checked the ignition power wire comming from the ecu and its getting 14v. This is weird as hell!

ya i checked that.

Is there another one besides the one on the thermastat housing? Yes, i am getting fuel pressure.

Here is my problem, my car will no start after i did a swap. The car is not getting spark and fuel. The car is turning over and the injector clips are getting 12v power but not noiding. The ecu is powering up and i am getting power to the coil. I have swap out the coil, bought a new...

Here is my problem, my car will no start after i did a swap. The car is not getting spark and fuel. The car is turning over and the injector clips are getting 12v power but not noiding. The ecu is powering up and i am getting power to the coil. I have swap out the coil, bought a new...