Search results for query: *

Are the two wires on the coil for two different sets of cylinders? I was throwing code4 8 and nine but i got a new ECU and the codes went away. Which i though Weird because i put the old ecu back on just to see and the codes were no longer flashing on the old ecu. And on an update it is...

I got the harness for the dohc zc made by hasport and i followed there instruction. I have gone through and checked the wires to make sure that the wires are all going to the right places following the zc distributer pin guide (for the sohc). I am still only getting the spark on one cylinder...

is it turning over faster than normal?

I have a SOHC Zc in my 91 civic but when i roll it over i am only getting spark on one of the cylinders. i have new wires plugs cap and rotor as well as ecu and Distributor. Does any one know why it would only be getting spark on one cylinder when checked right at the dizzy.

okay so i Replaced the ecu and it is not throwing code 8 and nine anymore but it still will not start. It is getting weak to no spark on intermittent cylinders. I have tested compression and mechanical timing on the the motor and thats all fine. There are new spark plug wires on it and a new...

ok well ive done that with 2 different dizzys. im starting to think its an ecu prob. because it is throwing code 8 and 9 and on both dist. Does that sound right? Is there any way i can check?

ok so i did a sohc zc swap in my 91 dx hatch civic project car. ANd i have run into a couple of problems. The first problem is the car is only getting spark to the 1st and 3rd cyl. THe dizzy is brand new. i bought my harness from hasport and they sent me the dohc zc harness. I didnt...