My bad. I found the light on the ECU./ECM. It flashes 6 times with my engine light on. I checked a service manual and it says it's my coolant tempature. I don't have my sensor connected. Would that make my car act funny?
I don't have the plug for this distributor. Would I be able to cut it off and splice the wires to the harness? Should I even bother with putting it on the car? The picture of the intake is the one I had on the car. On the TPS plug, should I switch the green and yellow wires for the intake that...
This is the distributor and intake I have on my car now. It runs but when I rev the motor to about 3-4 thousand rpms it want's to act like I'm continuously pushing the pedal. Sounds like vvrruuummm, vruum, vruum.
I have the D15B2 distributor hooked up. All wire colors matched on plugs. according to oreillyauto.com my ecu is the correct one for my car. The intake is supposed to be the one for that ecu too. 2 injectors not 4. The harness plugs right up.
I've loosened the distributor bults and moved the distributor both ways and it didn't fix the problem. I guess you could say the car is going vrruumm, vrum, vrum. It's not supposed to do that, specially when around 3-4 thousand rpms.
I would record the sound but it's late and I'm sure my neighbors won't like me running my car right now. So far, everything that has been wrong with my car, I've been able to without having to buy anything for it. I'm hoping to keep it that way because I have no money right now.
16* BTDC?
It's a 91 civic. The motor is a D15B7 with a D15B2 head (PM3). I have a PM6 ecu. It's like it's red lining too soon and it smells like it's burning too much gas.
I've recently had a timing issue with my car. I got it fixed but now when I give it gas it wants to make a whooping sound. Could I still be off on my timing? Do I need to adjust the rocker arms? Or do I have something else wrong with my car now? I was told I could be a tooth off on my timing. Is...
Compared to the vacuum diagram, I don't have the charcoal canister and purge cut-off solenoid valve. I have a small piece of hose just hanging where the charcoal canister is supposed to hook up to on the intake. My MAP senser only has one spot where a vacuum runs from it and it's hook up where...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.