1992 Civic cx PART OUT EVERYTHING!!!

[dornon13]

Well ladies and gentlemen I have gone and wrecked my hatch and rather than fix it I am going to go ahead and part it out. I am selling EVERYTHING off this car so dont hesitate to ask for a small part. I will list the main things i would like to get rid of and you guys can ask for the minor pieces.
here goes most prices are OBO but are close to what i need out of them so no low balling. I have researched every part to get an idea of how much they go for so I dont think any of the prices are unreasonable.
Car/Parts located in Tullahoma, TN but i go to school in Chattanooga, TN
contact info:
Chris Dornon
chris_dornon@hotmail.com
aim: chris dornon13
pm works well too
for big items i will give out phone number over pms or email
Will post pictures of everything in about a week but untill then i can give pretty good descriptions of things.
THE LIST: (shipping not included)
ITR shift gold linkage $100
http://www.dornonphotography.com/uploads/hondatech/partout/shiftlinkage.JPG
Polished Hasport EG mounts $200
http://www.dornonphotography.com/uploads/hondatech/partout/mounts.JPG
http://www.dornonphotography.com/uploads/hondatech/partout/mounts2.JPG

clutch master cylinder $??
Brake Master $??
Buddy Club P1 Racing SF wheels 15" white 4x100 13.2lbs each Total of 5 wheels 4 with brand new falken ZE912 (spare has old falken azenis 615) $600 OR TRADE got bronze?
Better pics once i can get them taken
http://www.dornonphotography.c...1.jpg
http://www.dornonphotography.c...2.jpg
http://www.dornonphotography.c...3.jpg
http://www.dornonphotography.c...4.jpg
Apexi World Sport Noir Flat Black Exhaust and magnaflow highflow cat $275 DROPPED!
http://www.dornonphotography.c...1.JPG
http://www.dornonphotography.c...2.JPG
http://www.dornonphotography.c...3.JPG
http://www.dornonphotography.c...4.JPG
http://www.dornonphotography.c...1.JPG
http://www.dornonphotography.c...2.JPG
http://www.dornonphotography.c...1.JPG
http://www.dornonphotography.c...2.JPG
http://www.dornonphotography.c...3.JPG
http://www.dornonphotography.c...4.JPG
http://www.dornonphotography.c...5.JPG
Jdm EG Fogs (replicas from JHP) with wiring and switch $75
http://www.dornonphotography.c...1.JPG
http://www.dornonphotography.c...2.JPG
http://www.dornonphotography.c...3.JPG
http://www.dornonphotography.c...4.JPG
http://www.dornonphotography.c...1.JPG
http://www.dornonphotography.c...2.JPG
http://www.dornonphotography.c...3.JPG
http://www.dornonphotography.c...4.JPG
http://www.dornonphotography.c...5.JPG
GSR strutbar $40
http://www.dornonphotography.c...r.JPG
Benen Ind. Rear Lower Tie Bar $75
http://www.dornonphotography.c...1.JPG
Center Console (cupholder and armrest) $45
http://www.dornonphotography.c...1.JPG
http://www.dornonphotography.c...2.JPG
http://www.dornonphotography.c...3.JPG
http://www.dornonphotography.c...4.JPG
http://www.dornonphotography.c...5.JPG
http://www.dornonphotography.c...6.JPG
Rear Leather EG seats Grey $100 (small tears near the hinges from wreck..no other damage once installed will look perfect)
http://www.dornonphotography.c...1.JPG
http://www.dornonphotography.c...2.JPG
http://www.dornonphotography.c...3.JPG
http://www.dornonphotography.c...4.JPG
SIR front lip $50
http://www.dornonphotography.c...1.JPG
http://www.dornonphotography.c...2.JPG
http://www.dornonphotography.c...3.JPG
http://www.dornonphotography.c...4.JPG
http://www.dornonphotography.c...5.JPG
Tokico Illumina shocks with cheap lowing springs (shocks good shape) $200
GSR Shift knob $20
http://www.dornonphotography.c...1.JPG
http://www.dornonphotography.c...2.JPG
Omni power front camber kit (needs $40 ball joints ) $50
ITR rear sway bar $100
http://www.dornonphotography.c...3.JPG
http://www.dornonphotography.c...2.JPG
http://www.dornonphotography.c...1.JPG
Glove box $30
http://www.dornonphotography.c...1.JPG
http://www.dornonphotography.c...2.JPG
Gsr front Leather seats both ripped in the seat across middle $100obo
Recover bottom cusion and they will look awesome
http://www.dornonphotography.c...2.JPG
http://www.dornonphotography.c...3.JPG
98 Civic ex Steering wheel $50
http://www.dornonphotography.c...1.JPG
http://www.dornonphotography.c...2.JPG
Viper 791 Alarm with power lock conversion $200
Tail lights $80
door panels $30
http://www.dornonphotography.com/uploads/hondatech/partout/doorp1.JPG
http://www.dornonphotography.com/uploads/hondatech/partout/doorp2.JPG
http://www.dornonphotography.com/uploads/hondatech/partout/doorp3.JPG
http://www.dornonphotography.com/uploads/hondatech/partout/doorp4.JPG
http://www.dornonphotography.com/uploads/hondatech/partout/doorp5.JPG
http://www.dornonphotography.com/uploads/hondatech/partout/doorp6.JPG
Rear hatch $40
http://www.dornonphotography.com/uploads/hondatech/partout/hatch1.JPG
http://www.dornonphotography.com/uploads/hondatech/partout/hatch2.JPG
http://www.dornonphotography.com/uploads/hondatech/partout/hatch3.JPG
http://www.dornonphotography.com/uploads/hondatech/partout/hatch4.JPG
Rear Hatch Glass $50 (including rubber mounts)
http://www.dornonphotography.com/uploads/hondatech/partout/hatchglass.JPG
Manual Conversion (everything you see(minus throttle cable), probably can get most of the wiring too)
http://www.dornonphotography.com/uploads/hondatech/partout/manualconv.JPG
rear bumper $40 (small scrapage)
http://www.dornonphotography.com/uploads/hondatech/partout/rbumper1.JPG
http://www.dornonphotography.com/uploads/hondatech/partout/rbumper2.JPG
sideskirts $50
http://www.dornonphotography.com/uploads/hondatech/partout/skirts1.JPG
http://www.dornonphotography.com/uploads/hondatech/partout/skirts2.JPG

steering rack $15 (needs ball joints cuz i ripped them)
http://www.dornonphotography.com/uploads/hondatech/partout/srack1.JPG
http://www.dornonphotography.com/uploads/hondatech/partout/srack2.JPG


please bump for me I need to move parts as quickly as possible
before:

After:

 

[goldHB94]

rear seats?

 

[dornon13]

they may have been messed up in the accident strangely enough...ill check the condition friday

 

[LS_VTEC]

Interested in the cams, would like to see pic's of them, especially the lobes and the end's, just for "verification" purposes.

 

[charleskwinter]

fuck... what happened? i hit a concrete barrier on a poorly marked las vegas on ramp a few years ago... the worst day of my life. sorry man... was one of the nicest looking hatches of this body style

 

[charleskwinter]

that was also a bump but here is another...

 

[dornon13]

bump pic

 

[knuteiriktveiten]

how much for the remainder of the shell?

 

[dornon13]

more pics up and some new parts. if you really want whats left there isnt a whole lot. i was going to take it to the scrap yard for some cash

 

[Team_Asterisk]

Hi, I am interested in the wheels. Would you be willing to ship them to 61801, USA? I have a friend with a Lancer ES who is looking for some nice FWD non ricy rims, and the bolt pattern is the same foh his year. sorry I know I just joined today.

EDIT: what offsets nd width are the wheels, btw?

(IE: 48+ offset 15"x6")

 

[dornon13]

shipping will be around 100 dollars if you wish to do that.

 

[knuteiriktveiten]

wats all left

 

[dornon13]

basically body and glass and most everything in the bay other than the engine

front and rear hubs gone, suspension gone, motor gone, interior gone
(these parts removed not necessarily sold the parts list is up to date i will note if a part is sold)

 

[dornon13]

bump new pics/parts

 

[smccall]

How much for the quarter window molding for both sides to 30253?

 

[dornon13]

just the molding? like 20 shipped if i can get it off

 

[smccall]

Ok, can you try and get them off and send me of pic of them. I can then buy them from you.
Thanks

Also interested in your seats. I'm in Atlanta so I can drive up to get this stuff from you.

 

[killektiv]

PM'd about the wheels if they are still available.

 

[dornon13]

yeah man if you want those seats we can meet up in chattanooga. and you can have the moldings for like 10 bucks

 

[Luis998]

Think your steering wheel will fit on a '94 LX? Mine has gotten really worn out over the years.