I put a b16a in a 91 dx hatch. It is throwing a 15,ignition output signal, and will not start. I ran the two cylinder sensor wires from the dizzy to the ecu. C1 and C2. Are there any more wires from the distributer that need to be ran to the ecu. Does anyone know witch wire is the ignition output signal. Any help very appreciated. Thanks
91 dx b16a swap
- Thread starter crxmansir
- Start date
- Replies 1
- Views 964
We may earn a small commission from affiliate links and paid advertisements. Terms
ignition output signal is a white wire from the distributor - branches into 2 wires in the harness and connects to ECU at pins B15 & B17 - if you did the DPFI to MPFI wiring changes (using the DX harness) the cylinder position sensor wires are the only ones added at the distributor