DAM!!!
New Member
I have only the best performance parts for the H22 VTEC 92-01 HONDA PRELUDE
I bought all this last year (tax return money) and now this year I came up on great deals with the H23 so I bought all the performance parts for the H23 and now have no use for the H22 parts anymore.
Skunk2 intake manifold (never installed and still have the box and hardware for it)
Skunk2 68mm throttle body( never installed and come with all hardware for it)
4340 Steel Billet Crower Connecting Rods with crower bearings already pressed on ( bought off ebay from some guy he used them for about 500+ mile if i remeber right, I never used them, great condition they are good for forced induction, nitrous, high rpm..ect
Skunk2 cam gears (never installed and still in box)
KMS engine deleopment valve train, duel springs, titanim retainers, forged stainless steel valves ( bought of ebay from some guy who crashed his car before he could use them, I never used them as well, not in the original package....check them out ebay#170202630047)
Milled H22 Head with vtec solenoid ( bought of ebay, JDM head, milled for added compression, no valve cover or springs, retainers, valves, comes with rocker arms, camshaft caps with all bolts and the vtec solenoid)
H22 VTEC ECU OBD1 (P13, 5 speed, JDM, unmodified, never installed)
H22 Vtec solenoid, used, pulled it off another H22 HEAD before i sold it (not the head I just described)
Brian Crower STG 2 Camshafts (bought from brian crower, never installed, comes with camshaft lube when ready to install and comes with the specs about them you need to upgrade your valvetrain to handle these)
96 H22a vtec block, walls are in great shape (nearly complete block except for the rods and pistons, but has nearly everything else, the crankshaft is in perfect condition, all the timing belt components, pully, inner crank pully, oil squirters, oil pump, balance shafts, oil pan, fly wheel, timing belt tensor....ect)
92-01 h22 vtec OIL squirters with all the bolts, ready to be installed (these oil squirters are not the ones from the h22 block I just mentioned these are in great shape and work fine very hard to find and cost like 120 from the dealer)
honda prelude bb6 digital climate control, with pig tail wires (from japan, never installed)
Also I have, forged JE 9:1 comp 87mm turbo pistons with spiral locks for the H22 or H23 must sleeve block (bought from ebay, they have scoring on the side skirts cause the previous owner put them in a FRM block with out sleeving it and started the car, they were used momentairly for only a few seconds is what he said, I got them free from him when I bought a part off him so I have no use for them)
Send me an offer if you like anything you see. Ill even do trades for anything as long as its something I like.
I have clear pictures off all the stuff I just listed, hit me up if you want to see any pic's, These will all be posted up on ebay really soon as buy it now option, so take advantage before its too late.
I accept paypal, checks and money orders
checks, e checks and money order's must clear with my bank before I ship out the part(s)
Please allow 1 day before shipping for i can get it packaged up safe and good.
I bought all this last year (tax return money) and now this year I came up on great deals with the H23 so I bought all the performance parts for the H23 and now have no use for the H22 parts anymore.
Skunk2 intake manifold (never installed and still have the box and hardware for it)
Skunk2 68mm throttle body( never installed and come with all hardware for it)
4340 Steel Billet Crower Connecting Rods with crower bearings already pressed on ( bought off ebay from some guy he used them for about 500+ mile if i remeber right, I never used them, great condition they are good for forced induction, nitrous, high rpm..ect
Skunk2 cam gears (never installed and still in box)
KMS engine deleopment valve train, duel springs, titanim retainers, forged stainless steel valves ( bought of ebay from some guy who crashed his car before he could use them, I never used them as well, not in the original package....check them out ebay#170202630047)
Milled H22 Head with vtec solenoid ( bought of ebay, JDM head, milled for added compression, no valve cover or springs, retainers, valves, comes with rocker arms, camshaft caps with all bolts and the vtec solenoid)
H22 VTEC ECU OBD1 (P13, 5 speed, JDM, unmodified, never installed)
H22 Vtec solenoid, used, pulled it off another H22 HEAD before i sold it (not the head I just described)
Brian Crower STG 2 Camshafts (bought from brian crower, never installed, comes with camshaft lube when ready to install and comes with the specs about them you need to upgrade your valvetrain to handle these)
96 H22a vtec block, walls are in great shape (nearly complete block except for the rods and pistons, but has nearly everything else, the crankshaft is in perfect condition, all the timing belt components, pully, inner crank pully, oil squirters, oil pump, balance shafts, oil pan, fly wheel, timing belt tensor....ect)
92-01 h22 vtec OIL squirters with all the bolts, ready to be installed (these oil squirters are not the ones from the h22 block I just mentioned these are in great shape and work fine very hard to find and cost like 120 from the dealer)
honda prelude bb6 digital climate control, with pig tail wires (from japan, never installed)
Also I have, forged JE 9:1 comp 87mm turbo pistons with spiral locks for the H22 or H23 must sleeve block (bought from ebay, they have scoring on the side skirts cause the previous owner put them in a FRM block with out sleeving it and started the car, they were used momentairly for only a few seconds is what he said, I got them free from him when I bought a part off him so I have no use for them)
Send me an offer if you like anything you see. Ill even do trades for anything as long as its something I like.
I have clear pictures off all the stuff I just listed, hit me up if you want to see any pic's, These will all be posted up on ebay really soon as buy it now option, so take advantage before its too late.
I accept paypal, checks and money orders
checks, e checks and money order's must clear with my bank before I ship out the part(s)
Please allow 1 day before shipping for i can get it packaged up safe and good.
Last edited: