The inside hood release on my 92 Civic is not functioning properly. When pulled it does not "pop" the hood so you can get to the secondary release under the hood. I can pull the release cable all the way and feel some tension from the other end. I can get to the secondary release with my hands but that alone will not open the hood. From what I've read so far there is a screw inside the engine compartment to adjust the tension. Is there any way to get the hood open without using the inside hood release. If not, what would recommend I do about the release cable as far as troubleshooting it and/or replacing it. Any suggestions would be great. Thanks in advance.