94 civic dx/w obd1 h22 external coil wiring

[xplicitcivic94]

My question is, with the external coil, where do i splice into and match what wires? On the dizzy, there are two plugs, one 8 pin and the other is 2 pin. coming from the harness, theire is a 7 pin plug and the 2 pin plug. which plug do i use to splice into for the coil? its a 4 pin but there are only 3 wire. would really appreciate the help. If anyone has a diagram or step by step write-up, i would greatly appreciate it

 

[hondafreak513]

You should just have to run the +and- from inside the dist. to the external coil. I don't remember the colors of the wires to use outside the dist.

 

[xplicitcivic94]

thanks mane!

does anybody know which wires are positive or negative?