1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

96 civic swap help

Discussion in 'Civic and del Sol - EG and EK' started by anthonyhnda87, Mar 26, 2012.

  1. anthonyhnda87

    anthonyhnda87 New Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Mar 26, 2012
    I am wanting to swap my D16y7 with a B18c1(trying to build a GSR) and i want to know if i can use the wiring harness thats in it and even though i am going from non-vtec to vtec help i know a little about hondas but not alot please help
     
  2. E_SolSi

    E_SolSi Member of the 20 nut club Moderator VIP

    Messages:
    30,034
    Likes Received:
    3,963
    Joined:
    Sep 28, 2002
    Location:
    CT
    :yes:
    you modify your stock harness to fit the B18 and add the necessary wires where needed

    there are also companies like rywire that sell wiring kits that make this pretty straight forward for those that are afraid of wiring
     
  3. anthonyhnda87

    anthonyhnda87 New Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Mar 26, 2012
    thanks i was told that but then i was also told that i would keep popping the vtec cylinoid? is there any truth to that?
     
  4. Matts96HB

    Matts96HB . Moderator VIP

    Messages:
    6,482
    Likes Received:
    389
    Joined:
    Apr 16, 2006
    There shouldn't be any "popping" going on if you do things correctly.

    You'll need to run wires for the VTEC solenoid and pressure sensor. That's about it.
     
Verification:
Draft saved Draft deleted

Share This Page