96prelude
Senior Member
have an 88 crx si with a b16a1 in it. i need new shifter bushings because there is alot of slop in the shifter. i've seen the diy write-ups but i need to know what to buy. would i but the bushings made for the CRX or bushings to match up with the engine / trans?
next question. through my research i have found that the rear suspension set up is diff in the 88 as opposed to the 89-91. i have a friend that has a rear disk set up from a DA integra, will that work with aftermarket coilovers made for the 89-91? also are there any good coilover set-ups that will fit the 88 without modification?
please don't tell me to search. i searched already.
thanks in advance for your help.
next question. through my research i have found that the rear suspension set up is diff in the 88 as opposed to the 89-91. i have a friend that has a rear disk set up from a DA integra, will that work with aftermarket coilovers made for the 89-91? also are there any good coilover set-ups that will fit the 88 without modification?
please don't tell me to search. i searched already.
thanks in advance for your help.