The nut on the wastegate, to adjust boost, is it, the higher the nut (loosened) the lower the boost, or is it the lower the nut (tightened), the lower the boost?
The more you tighten fown the wastegate adjustment bolt/nut, the higher the minimum boost setting.
For example, take the bolt out completely, it might hold 6 PSI if the spring is a 7 psi spring. If you tighten it down a good bit(careful not to compress the spring too much), you might squeeze 9 psi out of a 7 psi spring.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.