1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

B-Series Transmission Rebuild

Discussion in 'General Tech and Maintenance' started by Matts96HB, Jul 7, 2011.

  1. Matts96HB

    Matts96HB . Moderator VIP

    Likes Received:
    Apr 16, 2006
    I've decided to rebuild my hydraulic B16 transmission myself. People around here want far too much money for a soft rebuild to be done, so I am going to do it myself. Synchrotech Carbon Coated Synchro sets sell for $200 on eBay, compared to $300 for an OEM set from Majestic. I'll be going with the Synchrotech set.

    I have one question, though. Does anyone know which axle seals I should be using with my transmission? I have a B16 transmission LS axles, and a B16 intermediate shaft. I believe this means I should need one B16 seal, and one LS seal. The side on the intermediate shaft seems to be leaking, so I'm assuming that I have the wrong one in there. Any advice?

    I'll be posting pics and details as I go. This is a topic that hasn't been covered well on Hondaswap.
  2. 91_stylin_civic

    91_stylin_civic Member

    Likes Received:
    Oct 17, 2008
    New Jersey
    Im in for the info. I had an issue with my seals but can't remember what was the fix. I want to say I used the ls seals but my trans is cable.
Draft saved Draft deleted

Share This Page