Ok this sucks i'm cruising on 95 hit the exit ramp and car goes kaboom. The car just has a CTR intake cam and new cam seals. I've put exactly 507 miles on this thing since then and did'nt even go into vtec until after 50 miles. The car turns over the cam gears and belt are moving and its turning over fast just not starting. I took the fuel line off the rail and turned the key so I got fuel. The problem no spark I only checked #4 need to do the others but nothing. I took cap off checked rotor every thing was intact and changed probably 1200 miles ago. What could be the culprit here??
If its the distrubter,coilpack would either of those cause it to just shutdown with no warning symptoms?? The only thing the car has been doing is idleing kinda high especially after the cam install but I think its the throttle cable. I can put my toe under the gas pedal and lift and it will idle down.
Please help to narrow down this problem. What do I do to check for this stuff. My mechanic said check the black wire with yellow stripe with a test light. What exactly will this tell me he confused me completely?
Any ideas?
Any chance my motor is toast?
If its the distrubter,coilpack would either of those cause it to just shutdown with no warning symptoms?? The only thing the car has been doing is idleing kinda high especially after the cam install but I think its the throttle cable. I can put my toe under the gas pedal and lift and it will idle down.
Please help to narrow down this problem. What do I do to check for this stuff. My mechanic said check the black wire with yellow stripe with a test light. What exactly will this tell me he confused me completely?
Any ideas?
Any chance my motor is toast?