B16 rear mount Q

[Hpowered1]

I had a b16 put in my 94cx and the shop that did it had an integra rear bracket and used that one because the one I had was bent. However, only one of the two bolt holes lined up and they said it was because I needed the rear del sol bracket to make it bolt up right. The only thing I can think is it was an LS bracket?? So would the GSR one work as well as the del sol one?? Thanks for the help

 

[HatchSpeeD]

Anyone one of those B-series bracket should have worked. Basically any 94+ integra bracket should work. The one you have must be from something else or the mechanic is an idiot.

 

[Hpowered1]

so could it be from a 90-93 integra?

Quoted post[/post]]
Anyone one of those B-series bracket should have worked. Basically any 94+ integra bracket should work. The one you have must be from something else or the mechanic is an idiot.

 

[VTECin5th]

Quoted post[/post]]
so could it be from a 90-93 integra?

Quoted post[/post]]
Anyone one of those B-series bracket should have worked. Basically any 94+ integra bracket should work. The one you have must be from something else or the mechanic is an idiot.

I think that one is different from the 94+
That bracket is a BITCH to get the bolts in from inside the engine bay/under the car.
I have only 1/2 bolts there too after changing my clutch