Hi there I have a 1st Gen b16a (PR3) in a 89 Si and I seem to have a problem where when I maintain a certain throttle load the car seems to bog/feel flat until I give the car some gas and it goes back to normal. I heard that the common problem would be the primary and secondary 02 sensor wires mixed up. I re-wired the two so that C8 and C16 are going to the proper sensors. But the problem remains. I get no codes and when I disconnect the 02 wires I get no ECU code either. Any insight would be helpful. Thanks for your advise in advance.
P.S. All new vacuum lines and new map sensor recently put in
P.S. All new vacuum lines and new map sensor recently put in