b16A2 swap

[wisemansoji]

I got a b16A2 from a 2000 SI civic putting in a 94 HB I got the obd2 ecu and the b16A2 obd2 wiring harness. Should I use this harness or use my cars stock harness.

Is it easier to make my car obd2 or how do I make this run obd1

 

[mrnice1058]

run obd1 easier because your ecu is easy to work with and tune beside if you convert your car to obd2(foolish) you would have to re-wire the whole car use your harness add the two vtec wires and call it day o yeah you are going to need a vtec obd1 ecu

 

[wisemansoji]

ok I'll use a p30 dohc vtec ecu from a del sol, but do I use the cars stock wiring harness.

I'm confused with what wiring harness to use.

 

[wisemansoji]

should I use a obd2 gsr harness or a 94-95 del sol engine harness with my p30 ecu

 

[deth101]

I used a 98 gsr harness,plugged right in,no bullshit rewiring or dist changing....any questions you can pm me,I did a 00si into a 95dx,obd1, on mine....easy

 

[twisted civic]

Originally posted by wisemansoji@Oct 11 2004, 12:04 AM
I got a b16A2 from a 2000 SI civic putting in a 94 HB I got the obd2 ecu and the b16A2 obd2 wiring harness. Should I use this harness or use my cars stock harness.

Is it easier to make my car obd2 or how do I make this run obd1

[post=401021]Quoted post[/post]​

use your car's obd1 harness, and get a p28, add/lengthen wires as necessary.