b18 swap into a 1988 CRX HF

[B18CRX1988]

okay, im having trouble with my swap. I have the motor and all wiring hooked up, but my axles from the 91 integra will not fit into the stock hub of the CRX, the axle is too big... Do i have to use the Hub from the 91 Integra??

Thanks for the help

 

[allmotord16rex]

Did you remove the spacer in the hub and the dust seal on the axle? The axle will not fit unless you do. Here is a link to help you out. http://www.hasport.com/News/Articles/Haspo...ort%20Axles.htm

 

[gohondago]

Yes the axles is too big. THE HF has smaller hubs than the DX and Si.

You are going to have to swap either DX or Si hubs on your HF.

 

[90crxb16a]

my wife said my axle was too big also, so i was going to upgrade her

 

[legutki]

Originally posted by gohondago@Jun 29 2003, 12:19 AM


You are going to have to swap either DX or Si hubs on your HF.