bustedknuckles
Member
my friend has a 91 crx i have a b18a out of my wrecked 91 teg. it should be basic put in besides axles, linkage and motor mounts rite?
We may earn a small commission from affiliate links and paid advertisements. Terms
Originally posted by revolution8k@Aug 27 2004, 11:53 PM
ECU, probably an obd conversion harness is needed in there and tranny.
[post=382927]Quoted post[/post]
Originally posted by kylemarhx+Aug 28 2004, 02:38 AM-->revolution8k@Aug 27 2004, 11:53 PM
ECU, probably an obd conversion harness is needed in there and tranny.
[post=382927]Quoted post[/post]
they're both obd0 and non-vtec, no conversion harness is needed.
[post=382964]Quoted post[/post]
Originally posted by revolution8k+Aug 28 2004, 04:28 PM-->Originally posted by kylemarhx@Aug 28 2004, 02:38 AM
revolution8k@Aug 27 2004, 11:53 PM
ECU, probably an obd conversion harness is needed in there and tranny.
[post=382927]Quoted post[/post]
they're both obd0 and non-vtec, no conversion harness is needed.
[post=382964]Quoted post[/post]
You're right, I looked at the wrong info in the reference section.
[post=383110]Quoted post[/post]
Originally posted by MikeBergy+Aug 29 2004, 03:45 AM-->Originally posted by revolution8k@Aug 28 2004, 04:28 PM
Originally posted by kylemarhx@Aug 28 2004, 02:38 AM
revolution8k@Aug 27 2004, 11:53 PM
ECU, probably an obd conversion harness is needed in there and tranny.
[post=382927]Quoted post[/post]
they're both obd0 and non-vtec, no conversion harness is needed.
[post=382964]Quoted post[/post]
You're right, I looked at the wrong info in the reference section.
[post=383110]Quoted post[/post]
You had to look in the reference section for that?
Another thing thyat was not mentioned was the fact that if it an hf, you will have to swap the front hub assemblies with the integra's or get some dx or si hubs. I'd just use the integra's.
[post=383225]Quoted post[/post]
Originally posted by revolution8k+Aug 29 2004, 11:41 AM-->Originally posted by MikeBergy@Aug 29 2004, 03:45 AM
Originally posted by revolution8k@Aug 28 2004, 04:28 PM
Originally posted by kylemarhx@Aug 28 2004, 02:38 AM
revolution8k@Aug 27 2004, 11:53 PM
ECU, probably an obd conversion harness is needed in there and tranny.
[post=382927]Quoted post[/post]
they're both obd0 and non-vtec, no conversion harness is needed.
[post=382964]Quoted post[/post]
You're right, I looked at the wrong info in the reference section.
[post=383110]Quoted post[/post]
You had to look in the reference section for that?
Another thing thyat was not mentioned was the fact that if it an hf, you will have to swap the front hub assemblies with the integra's or get some dx or si hubs. I'd just use the integra's.
[post=383225]Quoted post[/post]
You have everything memorized? I have other things to remember besides what motor is where and whatnot. Just keep taking stabs....yeah..
[post=383291]Quoted post[/post]
Originally posted by bustedknuckles@Sep 15 2004, 02:31 PM
alrite sounds easy enough what mounts and linkage should i use?
[post=390691]Quoted post[/post]