1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

b18a1 help needed badly.. again

Discussion in 'HYBRID -> EG-EK / DC' started by sleeperstyle, Jul 16, 2006.

  1. sleeperstyle

    sleeperstyle Junior Member

    Messages:
    7
    Likes Received:
    0
    Joined:
    Jul 9, 2006
    need help with some vaccum lines.. and cant seem to find the correct place to put them..

    they are

    1. the line from the map sensor
    2. the line from the throttle body
    3. and lastly the line from the canister on the firewall

    help me out please so i can get my hatch back on the road
     
    Last edited: Jul 16, 2006
  2. sleeperstyle

    sleeperstyle Junior Member

    Messages:
    7
    Likes Received:
    0
    Joined:
    Jul 9, 2006
    bump ..
     
  3. brush

    brush Junior Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Aug 4, 2006
    map sensor line goes to the little line in on the throttle body just to the right of the only other input line which is bigger, and that one goes to your charcoal canister, on the bottom input line of two next to the single input line. top one of the two goes to the purge control sol. valve on the firewall.and the single input line next to the two just mentioned goes to two way valve on firewall.
     
Verification:
Draft saved Draft deleted

Share This Page