you have to notch the rear crossmember (dunno if thats the right word for it) but where the rear motor mount sits, you have to hammer that lip down in order for the rear mount to go in.
then you have to make a nice dent on the frame rail below the driver side strut tower, for the alternator.
never heard anything about the exhaust clearance, nor have i had a problem.
if you get a good set of mounts, i.e.: hasport or avid racing, or (i got) arizona race and machine. they come with instructions on the dents that need to be made.
if your going obd1 i think you need a obd1 o2 sensor, or are the obd2 ones the same? and a obd1 distributer.
basically have to convert your stock d series wire harness to obd1, then convert the engine to obd1 as well.
i dont think you need the obd2 to obd1 conversion harness.
i believe you need the following:
obd0 to obd1 ecu conversion harness, to plug obd1 computer in.
obd1 vtec distributer (gsr, or delsol vtec.)
obd0 to obd1 distributer conversion harness.
vtec wire harness. (easily can be made by yourself but if you buy the stuff off of rywire all three harnesses come together for 200.)
obd1 02 sensor.
i believe thats right, somebody please correct me if im wrong.
then you have to make a nice dent on the frame rail below the driver side strut tower, for the alternator.
never heard anything about the exhaust clearance, nor have i had a problem.
if you get a good set of mounts, i.e.: hasport or avid racing, or (i got) arizona race and machine. they come with instructions on the dents that need to be made.
if your going obd1 i think you need a obd1 o2 sensor, or are the obd2 ones the same? and a obd1 distributer.
basically have to convert your stock d series wire harness to obd1, then convert the engine to obd1 as well.
i dont think you need the obd2 to obd1 conversion harness.
i believe you need the following:
obd0 to obd1 ecu conversion harness, to plug obd1 computer in.
obd1 vtec distributer (gsr, or delsol vtec.)
obd0 to obd1 distributer conversion harness.
vtec wire harness. (easily can be made by yourself but if you buy the stuff off of rywire all three harnesses come together for 200.)
obd1 02 sensor.
i believe thats right, somebody please correct me if im wrong.