Discussion in 'HYBRID -> EG-EK / DC' started by thegreat1310, Feb 19, 2006.
what do i need manegment wise for my obd2 b20b to work in my obd1 eg
you should be fine with that.
so a pr4 would be good right?and i should use the ls axles right?thanks
o yeah what about shift linkage, will my z6 linkage work
pr4, yes im using it. as long as yours is obd1.
ls axles, yes thats what im using.
shift linkage, same linkage for all b series swaps. so no, your z6 wont owrk. since those are for d series.
ok thats all i need 2 know thanks
i use a p75 for my b20z.
You can also use the obd2 distributor, if you rewire it.
I also used my dx engine harness.
Good luck with the swap.
Thumbs up for another B20 swap. I have a B20Z2 in my 93 DX Hatch.
I have a B20b block with a 2000 si head going into my 93 VX what ECU should I get? From what this link says( http://www.hondaswap.com/forums/index.php?showtopic=29813 ) I need a obd1 GSR ecu but if i were to get an obd2 would it be any easier?
no,if you car is obd1 aobd2 conversion is to much pain obd1 is best for tuning
Separate names with a comma.