1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

b21 blew

Discussion in 'Prelude' started by riding 757, Feb 21, 2008.

  1. riding 757

    riding 757 New Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Feb 21, 2008
    my b21 blew in my 1991 prelude can i put a b18 in there
     
  2. Uncle Buck

    Uncle Buck JDMDecals.com guru

    Messages:
    198
    Likes Received:
    2
    Joined:
    Nov 30, 2007
    Location:
    Spearfish, South Dakota
    sorry B18 wont fit.... the head wont clear the hood and also there is no aftermarket mounts available.... only true HP motor gain you can drop in is a H22... but id just go with a Jspec B20a
     
  3. 1Funryd

    1Funryd Member

    Messages:
    78
    Likes Received:
    0
    Joined:
    Dec 8, 2006
    Here is the link to the most informative writeups for the H22 swap into the 3rd gen chassis:

    3rd Gen FAQ/Resources - Common Fixes, Manuals, Write ups, etc - Preludepower.com

    Its on preludpower.com

    As for the wiring for the conversion, uncle Buck is correct, just email Ryan@rywire.com and they can do the harness conversion for you.

    Mounts are sold through me since I had them produced and did all the nasty hardwork to get them produced.

    I sell the mounts for $475 + shipping and any paypal fees, but I also accept money orders.

    Anyone can contact me at: onefunrydperformance@q.com
    Or pm me thru here as well.

    And sorry but AZ Race will not give out that information for the dimensions, they worked to hard on this project to just give up all the secrets.

    Sean
    (206)304-4095
     
Verification:
Draft saved Draft deleted

Share This Page