vtecdeeznutz
Banned
im typeing this from a touchscreen fone as this is only thing I have for internet ok just got booted by dseries.org cuz they like to bag on ppl and then not expected someonne to say say anything back first of all I don't have a computer im duing this is from a cheap smart fone which I can text and it don't write way I rote in the speed. im typing it so bare wit me please
I have a b8 bottom
y8 head
I bought a 89 dpfi convertd. 2 mpfi wired wit vtec and I streetlights jumper harness of a guy on craiglist note complete harness is 89 headlight to tail light
now the motor came from my eg I
it had the d15b8 proseries im wit no name fuel rail
spoon header 3 in exhaust
the bay harness was a vtec. one with the p28 running it
my question is how duz a 8 valve motor run on a vtec ecu
and run perfectly fine? Peppy and everything I redlined @ 55k just about that and still take. a ls da I was hamazed wen I raced hat guy and I didn't evn heat my tires he did and for a while to
anyway I finshd the swap I got fuel I got a spark looks faint tho
it cranks no fire im using a aem can gear question when I time the mini
e wit a adjustable can gear do I advance or retard it
another thing is I'm getting fuel in the chamber cuz pulling the plugs they r not wet but smell like gas
I have both dizzy the td41u and the 42u and need to no how to test them wit a tester aka a multimeter
the compression seems gud I don't have a tool for that but wen I crank it a gud amount of air goes out the header and I Chang's the firing order and the cranking noise change like for the better but idk if im getting closer or not umm
I ground the yellow wire on the jumper and it duznt give me codes. and the cluster only light the check and the highbeam for thhat being lit im guessing cause I have finished running the driver side wiring for the lights plz ppl I don't need to get kick off here to I need this car running everything has bin installed as of two weeks ago help
I have a b8 bottom
y8 head
I bought a 89 dpfi convertd. 2 mpfi wired wit vtec and I streetlights jumper harness of a guy on craiglist note complete harness is 89 headlight to tail light
now the motor came from my eg I
it had the d15b8 proseries im wit no name fuel rail
spoon header 3 in exhaust
the bay harness was a vtec. one with the p28 running it
my question is how duz a 8 valve motor run on a vtec ecu
and run perfectly fine? Peppy and everything I redlined @ 55k just about that and still take. a ls da I was hamazed wen I raced hat guy and I didn't evn heat my tires he did and for a while to
anyway I finshd the swap I got fuel I got a spark looks faint tho
it cranks no fire im using a aem can gear question when I time the mini
e wit a adjustable can gear do I advance or retard it
another thing is I'm getting fuel in the chamber cuz pulling the plugs they r not wet but smell like gas
I have both dizzy the td41u and the 42u and need to no how to test them wit a tester aka a multimeter
the compression seems gud I don't have a tool for that but wen I crank it a gud amount of air goes out the header and I Chang's the firing order and the cranking noise change like for the better but idk if im getting closer or not umm
I ground the yellow wire on the jumper and it duznt give me codes. and the cluster only light the check and the highbeam for thhat being lit im guessing cause I have finished running the driver side wiring for the lights plz ppl I don't need to get kick off here to I need this car running everything has bin installed as of two weeks ago help