JDMEG-6
wek sos
i know this topic has been posted millions of times.. and yes, i have done my research.. i have about an inch thick of papers in front of me...
well, heres the deal...
i have a b18a1 LS motor (roughly: 130@6000 hp and 121@5200 trq.....9.2:1 ...dohc non vtec obd0)
-i know that the ls does not have vtec oil passage so i was planning on getting the golden eagle vtec conversion kit?!?
-use the oem ls head gasket
-gsr water pump.. and timing belt..
-arp head studs and rod bolts..
-any vtec oil pump will work right? best bet gsr?
-b16a head for the better airflow
-pct pistons? p73? or p30?
-chipping the stock p28 ecu for dohc vtec? b16a1 ecu? or p28/hondata?
-LS rods and crank (balanced)?
-new rod and main bearings
-new head gasket, oil pan gasket, rear main seal, oil return gasket, oil filter, thrust washers, rotating assembly balanced
-header (not sure which one yet)
-gsr or tr tranny
-310cc injectors? adj. FPR?
-crank girdle?
-a/b dohc vtec dizzy
-b16a IM
-94-01 gsr knock sensor?
my goal is to reach 250-260whp.. is this reasonable?¿?
tell me what you think.. opinions and suggestions would be greatly appreciated...
keep in mind i want to stay n/a no turbo...(maybe later down the road)
the swap is going into a 94 civic h/b...
-thanks-
well, heres the deal...
i have a b18a1 LS motor (roughly: 130@6000 hp and 121@5200 trq.....9.2:1 ...dohc non vtec obd0)
-i know that the ls does not have vtec oil passage so i was planning on getting the golden eagle vtec conversion kit?!?
-use the oem ls head gasket
-gsr water pump.. and timing belt..
-arp head studs and rod bolts..
-any vtec oil pump will work right? best bet gsr?
-b16a head for the better airflow
-pct pistons? p73? or p30?
-chipping the stock p28 ecu for dohc vtec? b16a1 ecu? or p28/hondata?
-LS rods and crank (balanced)?
-new rod and main bearings
-new head gasket, oil pan gasket, rear main seal, oil return gasket, oil filter, thrust washers, rotating assembly balanced
-header (not sure which one yet)
-gsr or tr tranny
-310cc injectors? adj. FPR?
-crank girdle?
-a/b dohc vtec dizzy
-b16a IM
-94-01 gsr knock sensor?
my goal is to reach 250-260whp.. is this reasonable?¿?
tell me what you think.. opinions and suggestions would be greatly appreciated...
keep in mind i want to stay n/a no turbo...(maybe later down the road)
the swap is going into a 94 civic h/b...
-thanks-