1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

CA built 84mm gsr turbo swap and turbo kit

Discussion in 'Parts: For Sale/Trade/Wanted' started by Acrite3404, Jun 25, 2008.

  1. Acrite3404

    Acrite3404 Junior Member

    Messages:
    514
    Likes Received:
    0
    Joined:
    Sep 9, 2005
    I have a fully built 95 bottom end and a semi built b16 head. will sell the swap separately, and the turbo kit separately but i will not part them out, i want to sell the it complete and the swap complete

    Head:
    91 B16 head
    ITR intake manifold
    ITR throttle body
    precision 1000cc injectors
    Kg retainers
    type r valve springs
    type r valves
    gsr cams
    New honda valve seals

    Block:
    2.1L 95 gsr block
    Golden eagle sleeved 84mm bore
    84mm Endyne(rollerwave)pistons
    Eagle ls rods
    micropolished and balanced ls crank
    ACL race bearings
    ITR oil pump
    ITR water pump
    moroso oil pan tapped with -10an fitting and line

    Tranny:
    GSR tranny
    XTD Stage 4 clutch
    gsr flywheel

    Turbo Kit:
    precision SC61 turbo with ported housing .70 on the intake and .63 on the exhaust
    SLS Shorty Ram manifold
    Tial 38mm wastegate
    3 piece 2 1/2 intercooler piping
    XSpower big intercooler
    greddy type rs BOV
    -3an feedline
    2 1/2 Downpipe
    3in QTP cutout
    F.A.S.T 3bar
    Im prolly missin a couple things but thats the gist. The car was tuned on 11Lbs
    and made 320whp and 252tq on crome at whitfield racing. i want 6800 for everything not looking to part it out. the motor was built by a friend of mine who owns a shop here in town. u can call or text me 760-646-3823
    mike

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
    Last edited: Jun 30, 2008
  2. efhondakid

    efhondakid My name is Byron. VIP

    Messages:
    7,034
    Likes Received:
    202
    Joined:
    Mar 2, 2007
    Location:
    Akron-Canton, Ohio
    Wish I had a job so I had money, ah well.
     
  3. eg6sir

    eg6sir Supa Mod Moderator VIP

    Messages:
    21,703
    Likes Received:
    321
    Joined:
    Aug 17, 2005
    Location:
    661 BK CA
    bump.. nice motor.. :drool:
     
  4. kestrel

    kestrel New Member

    Messages:
    15
    Likes Received:
    0
    Joined:
    Feb 8, 2008
    If you decide to seperate the Turbo from the engine let me know. I'd be interested in the motor and the tranny but not the turbo.
     
  5. Acrite3404

    Acrite3404 Junior Member

    Messages:
    514
    Likes Received:
    0
    Joined:
    Sep 9, 2005
    prolly wont do that. but i will keep it in mind
     
  6. Acrite3404

    Acrite3404 Junior Member

    Messages:
    514
    Likes Received:
    0
    Joined:
    Sep 9, 2005
    will let just the motor and tranny go separate
     
  7. Acrite3404

    Acrite3404 Junior Member

    Messages:
    514
    Likes Received:
    0
    Joined:
    Sep 9, 2005
  8. Acrite3404

    Acrite3404 Junior Member

    Messages:
    514
    Likes Received:
    0
    Joined:
    Sep 9, 2005
  9. Acrite3404

    Acrite3404 Junior Member

    Messages:
    514
    Likes Received:
    0
    Joined:
    Sep 9, 2005
Verification:
Draft saved Draft deleted

Share This Page