Can it be done/What would be required

We may earn a small commission from affiliate links and paid advertisements. Terms

D

DJNecrogami

New Member
I have an 88 Teg USDM D16A1 (Blown Valvetrain)
On a stand i have a JDM ZC (Bought from H-Motorsonline)

The Mount on the D16A1 is on the side of the block
The Mount on the ZC is in the middle of the Cam Belt

Can i / how would i mount the ZC into the 88Teg?
Is there a mount available?
Thanks
 
No.

The USDM D16A1 has the Engine Mount attached to the side of the Block
The JDM ZC has the engine mount attached between the Cam Belt in the front of the block.

NOT the same mounting location.
 
have you done any research at all???
because i have and the only thing i came up with is that the zc came originally in the integra,and that the zc's are identical to the d series motors
 
I have a D16A1 from a 1988 Acura Integra USDM

I also have a JDM ZC Imported from Japan
They ARE NOT the exact same engine.
They appear to have a different mounting bracket.
Otherwise What is the bracket on the Front of that engine?
And are those holes on the side for the mount or?
 

Attachments

  • IMG_1224.JPG
    IMG_1224.JPG
    235.1 KB · Views: 136
  • IMG_1225.JPG
    IMG_1225.JPG
    218.7 KB · Views: 174
  • IMG_1227.JPG
    IMG_1227.JPG
    136.7 KB · Views: 165
  • IMG_1228.JPG
    IMG_1228.JPG
    224.8 KB · Views: 185
the only advice i have left for you is to put a new valve cover on that motor,,it is fuckin beat,and you obviously dont take care of your shit,or know your shit

but have a nice day:D
 
90teg, you don't read at all do you. He said ir's gone. This isn't your first retarded post either. You need to read man. I'm being nice here too,
 
You must log in or register to reply here.
Back
Top