hasport makes the bolt in kit, i wouldnt recomend cutting and rewelding.... bine there done that and it doesnt last... place racing makes everything that you need like motor mounts and shift linkage. as for the wiring you can use the Si wiring harness and just wire the vtec... i used axle from a DA TEG (90-93 integra). if you cant get the place racing shift linkage, get a linkage from a Integra and cut and reweld in back together.... about 2 inches......As for the ecu i would just go with the pr3 (ef8) that will set you pretty good..... dont go with the type r manifold you will loose the only torque that you have, go with the victor X..... anymore questions let me know