If you have a DPFI set up such as DX/Lx model then yes but not if you have a Hf/Si chasis. Let me know what model you have I make harness conversions and also I have Si harnesses and DX harnesses.
Peace!!!
If you have a DPFI set up such as DX/Lx model then yes but not if you have a Hf/Si chasis. Let me know what model you have I make harness conversions and also I have Si harnesses and DX harnesses.
Peace!!!
If the engine going in is an 89si, the correct harness to use would be the 89 si engine harness/ecu. BUT, due to cheap people, they have conversion harness' out there that you can use, but most require additional wiring depending on the engine used. So, do it right the first time, and use the 89 si harness. I'm sure you can find one unmollested from a junkyard for cheap, or contact Hasport and have them build you one.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.