d16a1 into a 89 crx

We may earn a small commission from affiliate links and paid advertisements. Terms

C

chondacrx

Junior Member
what all do i need to put a d16a1 integra motor into a 89 honda crx

thanks
 
youll need:

motor
tranny <--crx si tranny will work
harness <--crx si harness will work
shift linkage <--crx si linkage should work
mounts <--stock mounts work, no modification

ive got a 90 crx si w/ a dohc zc...swap was easy and fast...cheap too

My CRX w/ DOHC ZC
 
Originally posted by chondacrx@Jul 18 2004, 08:56 PM
what all do i need to put a d16a1 integra motor into a 89 honda crx

thanks
[post=364960]Quoted post[/post]​
Click to expand...



dont do it just use the sohc zc motor because it will be cheaper to do and it will have more horsepower a d16a1 motor only has 113 horse
 
will work but need mount on driver side also integ harness and ecu it would be ok to get mount of old integra but have to weld it on its not a zc right and distributor
 
You must log in or register to reply here.
Back
Top