I have a 1993 Del Sol that I did a 94 Integra swap on the front brakes. Calipers, hubs, brackets, pads, rotors, master cylinder and booster. After the install I bled all four wheels in the correct pattern and now when I drive it, after braking at some intersections, the brake pedal gets very stiff. So stiff in fact that the car won't go over 40 mph and I smell pads burning. I've adjusted the pedal, thinking that was it, but it didn't help. Tried swapping out vacuum hoses and that helped slightly, but it still isn't right. I've searched many forums and can't figure it out, as I haven't read where anyone has had this problem. Any thoughts?