dizzy plug

[racintweek]

im in the process of doing the mpfi wiring in my hatch

im trying to wire the cyl position sensor
i bought an after market dizzy that has diff color wires coming from it than what my wiring diagrams show
can any give my a pinout of the dizzy connectors for an OBD1 LS dizzy



help im lost

 

[racintweek]

i love replying to myself

anyways, i figured it out except for 2 wires

on the 2pin conn on the dizzy there is a black/yellow wire and a blue wire, but there are 2 blue wires going to the ecu, which pin does it go to? and there is no black/yellow wire at the ecu, where does it go?

 

[racintweek]

anybody???

 

[friz]

I tried to read your post but your avatar gives me the creeps.

 

[posol]

blue = tach signal
black/yellow = goes to ignition switch
white - to ecu
white/blue = TDC - to ECU
orange/blue = TDC - to ECU
white = crank - to ECU
orange = crank - to ECU
blue/yellow = cyl - to ECU
blue/green = cyl - to ECU



these might help:

http://www.angelfire.com/d20/hcivic88/dx-siwiring.html
http://icelord.net/honda/repair/ServiceMan...sh222/16-21.pdf

 

[racintweek]

is there any distinction between the two white wires for when i put the Si dizzy plug on my engine harness?

thats the prob im encountering

 

[posol]

i think i remember that one is thicker than the other or something, but i really don't know. i've never done the swap myself. i can only speculate from what i've read. obd0 sucks

 

[racintweek]

you are absoultely correct
im a retard i should have looked a little closer