1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

ecu help

Discussion in 'Civic and CRX - EF' started by Ky'sCRX, Oct 18, 2006.

  1. Ky'sCRX

    Ky'sCRX New Member

    Messages:
    125
    Likes Received:
    0
    Joined:
    Oct 11, 2006
    Location:
    Shepherdsville, Ky
    i have a b16 in my crx and i have read a places that the redline is around 8200-8500, but mine stops at about 7000. i have a pr3 ecu, is it the right one or what?
     
  2. AHHVTEC

    AHHVTEC Well-Known Member VIP

    Messages:
    13,122
    Likes Received:
    245
    Joined:
    Oct 13, 2006
    Location:
    Alabama
    pr3 is a obdo ecu so if you have a 1st gen motor you got the right one
     
  3. LateApex31

    LateApex31 New Member

    Messages:
    91
    Likes Received:
    1
    Joined:
    Aug 26, 2006
    PR3 is also available in an OBDI variant, although they are much less common.

    It is possible that someone swapped out ECU boards in your PR3 case, I would open it up and have a look.
     
  4. Ky'sCRX

    Ky'sCRX New Member

    Messages:
    125
    Likes Received:
    0
    Joined:
    Oct 11, 2006
    Location:
    Shepherdsville, Ky
    so should i just get a chip to get a high rev limiter
     
Verification:
Draft saved Draft deleted

Share This Page