sleeper759
New Member
So i got the motor in and wired up using the eg wire harness,i got a new shifter linkage then ran wires for the vtec solenoid,vtec pressure pump,evap solenoid and knock sensor. I then got an odbi destributor so now i can get it started but i think that the timing is a little off. The idleing is a little up and down then when that stops the idle drops way down. I took it for a ride but this thing has no balls at all and the throttle response is crap. So if anyone can give me some info on what i might have overlooked or how i can get this thing runing right it would be appreciated.