Just a heads up to anyone doing an Energy Suspension Bushing install on the drivers side LCA with a Moroso Oil pan. The pivot bushing bolt(the one farthest inward on the LCA) doesnt clear the Moroso pan.
I had to dremel the head off and use a shorter bolt which BARELY cleared as well. I think i used a lower tranny torque mount bolt.
No comments on the axle grease on the pan, the axle was a temporary replacement.
I had to dremel the head off and use a shorter bolt which BARELY cleared as well. I think i used a lower tranny torque mount bolt.
No comments on the axle grease on the pan, the axle was a temporary replacement.